Flow Rate 0.001 l/hr to 21 ml/min (10 ml syringe) Automatically emulsify adjuvant/antigen mixtures or other viscous fluids.Eliminates tedious manual operation with standard methods. Mix two fluids with- out human intervention and improve the consistency and quality of the product.Simple to use and set up. Through the menu driven program enter thesyringe diameter, the flow rate and select a dispense volume. The KDS 330 automatically performs the calibration and control functions. When in the emulsion mode, the KDS 330 cycles from infusion to withdraw-al continuously. The unit automatically infusions the preset volume and with- draws the preset volume. Dimensions 23 x 7.5 x 5.5 in (58 x 19 x 14 cm) Weight 16 lbs. (7.5 kg) > Set a rate and volume and the pump will infuse to the set volume and stopSet a rate the pump will continue to run until it is manually stopped. > Set a rate and volume and the pump will withdraw to the set volume and stop. Set a rate the pump will continue to run until it is manually stopped. ՕQuick set upImproved product qualityՕConsistent emulsion Automated processՕ5 modes of operation Emulsion, Infuse, Withdraw, Infuse/Withdraw, Withdraw/Infuse ֕Fast forward/reverse for easy loadingTwo 10 ml syringes with emulsion needle (not included)Օ0.001 ul/hr to 21 ml/min Menu drivenՕAutomatic shutoff Fast forward/fast reverse > Infusion is automatically followed up by withdrawal. The rate and volume settings can be set independently for infusion and withdrawal. > Withdrawal is automatically followed by infusion. The rate and volume set- tings can be set independently for infusion and withdrawal. > NOTE: KDScientific syringe pumps are for laboratory use only. They have not beenapproved by the FDA for clinical use. 84 October Hill Road Օ Holliston, Massachusetts 01746Phone: 508-429-6809 Fax: 508-893-0160E-mail: [email protected] Օ Web: www.kdscientific.com All specifications subject to change at anytime. size="-2">