Catalogs >
KB Electronics, Inc. >
KBVF Hybrid Drive - Chassis / IP 20

KBVF Hybrid Drive - Chassis / IP 20
4Pages

Catalog excerpts

KBVF Hybrid Drive A Digital AC Drive with Analog Interface IP 20 Enclosure Primary Features Horsepower 1/10 to 5 HP 1Ø & 3Ø Input 115/230/460 VAC, 50/60 Hz 3Ø Output 230/460 VAC 200% Starting Torque Power and Status Indicators Benefits Saves Time Easy to Install and Simple to Operate Does not require programming or commissioning Up and running in less than 10 minutes. Motors Last Longer Proprietary CL Software Provides overload protection, prevents motor burnout and eliminates nuisance tripping. UL approved as electronic overload protector for motors. Energy Saving Uses only the power the application requires Replacing constant speed with variable speed will significantly reduce energy costs. Combines Soft Start with Variable Speed Adjustable Soft Start. When an off the shelf drive does not meet your needs, we will work with you to provide a custom drive solution, Ready to Use, “Out-of-the-Box.” Customization includes: Pre-calibrating or programming of a stock control, adding a custom label or branding, custom software, PLC functions or designing a new control. GFCI software, with factory programming, allows the equipment to operate with Ground Fault Circuit Interruption circuit breakers or outlets.

Open the catalog to page 1

Additional Features Sensorless Flux Vector Control Flux Vector Compensation with Static Auto-Tune provides excellent speed regulation with high torque loads throughout the entire speed range. Auto energy saving at light loads. Smooth motor torque. Electronic Inrush Current Limit (EICL™) Protection Eliminates harmful inrush AC line current during power up. Provides smooth recovery to the previous set speed during a momentary power loss. Holding Torque at Zero Speed Resists motor shaft rotation when the drive is in “Stop” mode. Regeneration Protection Eliminates tripping due to high bus...

Open the catalog to page 2

Ratings & Dimensions 115 VAC 1-Phase Input • 230 VAC 3-Phase Output Ratings 230 VAC 1-Phase Input • 230 VAC 3-Phase Output Ratings Model No. 115/230 VAC 1-Phase Input • 230 VAC 3-Phase Output Ratings 230 VAC 3-Phase Input • 230 VAC 3-Phase Output Ratings 460 VAC 3-Phase Input • 460 VAC 3-Phase Output* Ratings Model No. *Contains SIVFR signal input isolation and Run/Fault output relay. Specifications Maximum Load (% of Current Overload for 2 Minutes) Carrier, Switching Frequency (kHz) Output Frequency Resolution (Hz) Minimum Output Frequency to Motor (Hz) Acceleration Time (Seconds)...

Open the catalog to page 3

General Connection Diagram Main Speed Potentiometer COMP Ground (Earth) AC Line Input (varies by model) (954) 346-4900 • Fax (954) 346-3377 Outside Florida Call Toll Free (800) 221-6570 info@kbelectronics.com • www.kbelectronics.com A42155 – Rev. G – 12/2012

Open the catalog to page 4

KBVF Hybrid Drive - Chassis / IP 20 4Pages

Catalog excerpts

All KB Electronics catalogs and technical brochures

KBVF Hybrid Drive - Chassis / IP 20
4Pages