KBAC Hybrid Drive - NEMA 4X / IP 65
4Pages

KBAC Hybrid Drive ™ A Digital AC Drive with Analog Interface Rugged Die-Cast Aluminum NEMA 4X / IP65 Enclosure with Hinged Cover Washdown and Watertight for Indoor and Outdoor Use Primary Features Horsepower 1/8 to 5 HP, Jumper Selectable 115/230/460 VAC -1ph & 3ph Input Output 230/460 VAC - 3ph for AC Induction Motors Starting Torque 200% Diagnostic LED Status Indicators FDA Approved Finish* GFCI Compatible Allows equipment to operate with Ground Fault Circuit Interruption circuit breakers or outlets. (Factory programming required.) Benefits Saves Time Easy to Install and Simple to Operate. Does not require commissioning. Up and running in less than 10 minutes. Motors Last Longer Proprietary CL Software Provides overload protection, prevents motor burnout and eliminates nuisance tripping. UL approved as electronic overload protector for motors. Energy Saving Uses only the power the application requires. Replacing constant speed with variable speed will significantly reduce energy costs. When an off the shelf drive does not meet your needs, KB will work with you to provide a custom drive solution, Ready to Use, “Out-of-the-Box.” Customization includes: Pre-calibrating or programming of a stock control, adding a custom label or branding, custom software, PLC functions or designing a new control. *White cases only.

Additional Features Sensorless Flux Vector Control Flux Vector Compensation with Static Auto-Tune provides excellent speed regulation with high torque loads throughout the entire speed range. Auto energy saving at light loads. Smooth motor torque. Electronic Inrush Current Limit (EICL™) Protection Eliminates harmful inrush AC line current during power up. Run/Fault Relay Can be used to turn equipment on or off, to signal a warning if the drive is put into “Stop” mode, or to signal if a fault has occurred. Start/Stop Switch Provides electronic “Start” and “Stop” functions. Provides smooth...

Ratings 115/230 VAC 1-Phase Input • 230 VAC 3-Phase Output Part No. 230 VAC 1-Phase Input • 230 VAC 3-Phase Output Part No. 460 VAC 3-Phase Input • 460 VAC 3-Phase Output Part No. *FDA approved (white cases only). *** Rated 2 HP (1.5 kW), 6.7 Amps with 1-Phase Input. Maximum Depth: Specifications Maximum Load (% of Current Overload for 2 Minutes) Carrier, Switching Frequency (kHz) Output Frequency Resolution (Hz) Minimum Output Frequency to Motor (Hz) 9.53 242 Acceleration Time (Seconds) Deceleration Time (Seconds) Speed Range (Ratio) Speed Regulation (30:1 Speed Range, 0 – Full Load) (%...

General Connection Diagram Main Speed Potentiometer CON2 Diagnostic LEDs Auto Ride-Through Rated Motor RPM Operation Start/Stop Switch Base Motor Freq. Run/Fault Relay A B C Motor Horsepower D Selection E Boost Braking Mode Output Relay Operation Stop Contact Torque Mode I2t Overload Ground (Earth) AC Line Input (varies by model) Ground (Earth) Represented by: KB ELECTRONICS, INC. 12095 NW 39th Street, Coral Springs, FL 33065-2516 (954) 346-4900 • Fax (954) 346-3377 Outside Florida Call Toll Free (800) 221-6570 info@kbelectronics.com • www.kbelectronics.com A42152 – Rev. I – 10/2015