Group: KAYDON
Catalog excerpts
©KAYDON® Corporation Issue 10 REALI-SLIM® Bearings Catalog 300 KAYDON created the thin-section bearing standard of the industry in 1954 based on inch sizes. The REALI-SLIM® inch-standard bearing is still the most widely used thin-section bearing in the world. However, for those applications that require metric envelope dimensions or for dimensional inter changeability with other products, KAYDON offers the REALI-SLIM MM™ series of bearings. These bearings are offered: • n cross sections of 8, 13, and 20mm i • ith bore diameters ranging from 20mm to 360mm w • ith many of the same options found on standard w REALI-SLIM® bearings The REALI-SLIM MM™ series may also be customized for special applications with options such as: • eramic balls c • pecial lubes s • ntegral seals i Consult Kaydon engineering or your Kaydon representative for details on customization. Download REALI-DESIGN MM® software from our website www.kaydonbearings.com to obtain specific load/life and other performance data not shown here. CONTACT KAYDON AT— KAYDON Corporation • Muskegon, Michigan 49443 Telephone: 231/755-3741 • Fax: 231/759-4102 Need Service Fast? REALI-SLIM MM™ Metric Series Bearings
Open the catalog to page 1REALI-SLIM® Bearings Catalog 300 ©KAYDON® Corporation Issue 10 REALI-SLIM MM™ Metric Series Bearing Selections Type A Angular Contact How to identify REALI-SLIM MM™ Bearings using our part number code: Standard and optional metric REALI-SLIM® bearings are marked for complete identification with a 9- or 10-digit part number. Positions 1–9 identify materials, size, type, separator type, and precision. Position 10 (optional) identifies nonstandard internal fit, either preload or clearance. Custom and proprietary bearings cannot be identified by code, and are marked only with a 9-digit number....
Open the catalog to page 2©KAYDON® Corporation Issue 10 REALI-SLIM® Bearings Catalog 300 1 3 mm SERIE S KAYDON Bearing Number Dimensions Land Diameters (mm) Capacity Radial (kg) Axial (kg) 2 0 mm SERIE S KAYDON Bearing Number Dimensions Land Diameters (mm) Capacity Radial (kg) Axial (kg) Circular pocket separator 1/4" (inch) balls F = 1.5 Bearing corners are normally chamfered Circular pocket separator 3/8" (inch) balls F = 1.5 Bearing corners are normally chamfered apacities listed are not simultaneous. For combined loading see discussion of Bearing Selection and Load Analysis. Dynamic capacities are based upon 1...
Open the catalog to page 3REALI-SLIM® Bearings Catalog 300 ©KAYDON® Corporation Issue 10 REALI-SLIM MM™ Metric Series Bearing Selections Type C Radial Contact 8 mm S E RIE S Dimensions Size (mm) Land Diameters (mm) KAYDON Bearing Number Snapover separator 5/32" (inch) balls Capacity Radial (kg) Static 8 mm S E R IES (DOUBLE SEALED) Dimensions Size (mm) Land Diameters (mm) KAYDON Bearing Number F = 0.8 Bearing corners are normally chamfered Snapover separator 5/32" (inch) balls C on r ad Assemb ly Type C F = 0.8 Bearing corners are normally chamfered apacities listed are not simultaneous. For combined loading see...
Open the catalog to page 4©KAYDON® Corporation Issue 10 REALI-SLIM® Bearings Catalog 300 1 3 mm SERIE S Dimensions Size (mm) Land Diameters (mm) KAYDON Bearing Number Snapover separator 1/4" (inch) balls 2 0 mm SERIE S Dimensions Size (mm) Land Diameters (mm) KAYDON Bearing Number F = 1.5 Bearing corners are normally chamfered Snapover separator 3/8" (inch) balls F = 1.5 Bearing corners are normally chamfered apacities listed are not simultaneous. For combined loading see discussion of Bearing Selection and Load Analysis. Dynamic capacities are based upon 1 C million revolutions of L10 life. Published capacities...
Open the catalog to page 5REALI-SLIM® Bearings Catalog 300 ©KAYDON® Corporation Issue 10 REALI-SLIM MM™ Metric Series Bearing Selections Type X Four-Point Contact 8 mm S ERIE S Dimensions Land Diameters Size (mm) (mm) KAYDON Bearing Number Snapover separator 5/32" (inch) balls 8 mm S E R IES (DOU BLE SEALED) Dimensions KAYDON Bearing Number Outside Land Land Static Dyn. Static Dyn. Static Dyn. Dia. Dia. L1 Dia. L2 F = 0.8 Bearing corners are normally chamfered Snapover separator 5/32" (inch) balls 4 Point C on tact Type X 4 Point C on tact Type X F = 0.8 Bearing corners are normally chamfered apacities listed are...
Open the catalog to page 6©KAYDON® Corporation Issue 10 REALI-SLIM® Bearings Catalog 300 Snapover separator 1/4" (inch) balls F = 1.5 Bearing corners are normally chamfered Snapover separator 3/8" (inch) balls F = 1.5 Bearing corners are normally chamfered apacities listed are not simultaneous. For combined loading see discussion of Bearing Selection and Load Analysis. Dynamic capacities are based upon 1 C million revolutions of L10 life. Published capacities do not apply to hybrid series bearings P, X, and Y - contact KAYDON product engineering for values. Static capacities are non-brinell limits based on rigid...
Open the catalog to page 7All Kaydon catalogs and technical brochures
-
Kaydon Thin Section Bearings
2 Pages
-
SKF remanufacturing services
6 Pages
-
Kaydon Oil & Gas
8 Pages
-
Kaydon Commercial Aerospace
3 Pages
-
Kaydon Mining brochure
4 Pages
-
HS Slewing Ring Bearings
2 Pages
-
WireY®
4 Pages
-
KT Series
1 Pages
-
WireX® Wire-Race Bearings
4 Pages
-
Catalog 390
134 Pages
-
Bearing applications guide
8 Pages
-
REALI-SLIM BALL & ROLLER BEARINGS
132 Pages
Archived catalogs
-
LARGE BEARINGS? DESIGN MANUEL
36 Pages