m etric Series Ball Bearings (BB Series)
3Pages

{{requestButtons}}

Catalog excerpts

m etric Series Ball Bearings (BB Series) - 1

REALI-SLIM® Bearings Catalog 300 ©KAYDON® Corporation Issue 10 Metric Series Ball Bearings (BB Series) Drop-in Replacements For Cross-Roller Bearings ENDURAKOTE plating—For applications requiring superior corrosion resistance we offer our proprietary ENDURAKOTE® plating. This thin, dense chrome plating gives AISI 52100 bearing material corrosion resistance equal to or better than that of AISI 440C stainless steel. Unlike many traditional chrome platings, the extremely hard surface of ENDURAKOTE® plating doesn’t peel and flake from the bearing race under stress, so corrosion resistance is retained and surface wear is minimized. The performance of ENDURAKOTE® plating has been proven in critical military, aerospace, and deep space applications. ® Seals/Shields—Standard industry seals are generally available from nitrile rubber. KAYDON can also provide custom seals manufactured from silicone or Viton® materials for applications where high temperature or extreme environments are likely to be encountered. KAYDON BB Metric Series four-point contact ball bearings are dimensionally interchangeable with cross-roller bearings. BB Series Bearings Are Available to Match the Bores and Widths of Common Cross-Roller Bearings. When factors such as cost, availability, corrosion resistance, tighter tolerances, torque, seal/shield options, and temperature resistance are important in your application, it pays to consider BB Series fourpoint contact metric ball bearings as an alternative to cross-roller bearings. The additional design flexibility they offer can often help you achieve your design objectives with optimum performance and economy. Additional features not commonly available in standard cross-roller bearings include a protective package for corrosion resistance, custom sealing for extreme environments, application-specific lubrication and temperature capability. Optimize Your Design Options With additional features not commonly available in standard cross-roller bearings, BB Series bearings provide greater design flexibility. Temperature Capability—Standard cross-roller bearings have a maximum full capacity operating temperature of only 212°F. In contrast, KAYDON bearings can operate at higher temperatures due to our heat treating procedures. Lubrication Options—KAYDON offers a full range of lubricants, allowing you to optimize bearing performance in a range of applications with special requirements for moisture resistance, hot or cold temperatures, vacuum, and low torque. Separators—The common roller spacer for many crossroller bearings is a non-metallic composite. High temperature and/or horizontal axis applications, however, require non-standard materials or a nonstandard separator design. KAYDON four-point contact ball bearings are available with separator options to meet a wide range of applications. Internal Fitup—KAYDON can help you optimize internal fitup of our BB Series four-point contact ball bearings to provide the desired operating performance. Pre-loaded bearings are recommended for greater stiffness, and diametral clearance is recommended for lower torque applications.

Open the catalog to page 1
m etric Series Ball Bearings (BB Series) - 2

©KAYDON® Corporation Issue 10 REALI-SLIM® Bearings Catalog 300 Metric Series Ball Bearings - BB Series (continued) Ø "O.D." WILL CLEAR "R" MAX. FIL. RAD. 4 EXT. CORNERS WILL CLEAR "R" MAX. FIL. RAD. 4 EXT. CORNERS Open Bearing Sealed Bearing All dimensions in mm (REALI-SLIM® replacements for RB Series standard cross-roller bearings) KAYDON Part No. Dynamic Capacity Bore O.D. Width (nominal +0) (nominal +0) (nominal +0) Note 1: Capacities listed are not simultaneous. For combined loading see discussion of Bearing Selection and Load Analysis. Dynamic capacities are based upon 1 million...

Open the catalog to page 2
m etric Series Ball Bearings (BB Series) - 3

REALI-SLIM® Bearings Catalog 300 ©KAYDON® Corporation Issue 10 Metric Series Ball Bearings - BB Series (continued) Model Number Standard Diametral Clearance CONTACT KAYDON AT— KAYDON Corporation • Muskegon, Michigan 49443 Telephone: 231/755-3741 • Fax: 231/759-4102 Need Service Fast?

Open the catalog to page 3

All Kaydon catalogs and technical brochures

  1. WireY®

    4 Pages

  2. KT Series

    1 Pages

  3. Catalog 390

    134 Pages

Archived catalogs