Catalogs >
Kawasaki Robotics GmbH >
D-Controller

D-Controller
6Pages

Catalog excerpts

The Kawasaki Robot and Controller are designed to easily integrate into a wide variety of applications. Kawasaki understands the controller is the heart of any robotic application, and the success of a project is often measured by the ease in which the system is set-up, integrated, programmed, and maintained, as well as its flexibility to accept changes during production. The 'D' Controller was carefully designed to meet these objectives, providing an ultra-ergonomic teach pendant and an easy to maintain expandable controller design allowing customization to meet even the most demanding...

Open the catalog to page 2

91003-1520(1/1) 160 550 550 600 D76 500 65 270 E R G E NC Y EM ERROR ERROR RESET MOTOR POWER CYCLE START TEACH HOLD REPEAT RUN 470 430 430 S TOP WARNING JST WARNING AVERTISSEMENT D77 1200 1200 AC460V 500 65 37 270 E R G E NC Y EM ERROR ERROR RESET MOTOR POWER CYCLE START TEACH HOLD REPEAT RUN S TOP WARNING WARNING MASS: 30kg / 66lb (approx.) LIFT UP THE CONTROLLER AS IN THE DRAWING BELOW. DURING WIRE SLING ADJUSTMENT. BE CAREFUL NOT TO INCLINE THE CONTROLLER BRAKE RELEASE AXES JT5 JT3 JT6 520 JT4 JT2 JT1 60819-2984 WARNING BRAKE RELEASES ENCLOSED PRESSING COULD CAUSE UNEXPECTED DROPPING OF...

Open the catalog to page 3

1 2 Impact Protection Ergonomic teach pendant reduces programming time The Teach Pendant incorporates both an operator keypad and an easy to read 6.4" color LCD touch screen. The utilization of this keypad, along with improved hardware capabilities, results in significant improvements in key response and robot control. The key arrangement is optimized for quick simple data entry and can be used in conjunction with the large LCD touch screen providing the user with an ergonomic platform for the control, operation, and programming of the robot. In terms of programming, the D Controller is...

Open the catalog to page 4

1 3 4 5 Expandable platform simplifies system upgrades • Control of peripheral equipment The Kawasaki D Controller is compatible with a variety of Fieldbus I/O systems such as DeviceNet, Allen Bradley Remote I/O, CC-Link, Profibus, Interbus-S as well as dedicated digital I/O enabling straightforward communication to a wide range of peripheral equipment. A built-in sequencer, using Kawasaki K-Logic, is also available making it possible to configure a highly advanced control system without the additional cost of adding an external PLC. • Network Communications The D Controller system supports...

Open the catalog to page 5

Kawasaki Robotics (USA), Inc. 28140 Lakeview Drive Wixom, Michigan 48393 Phone: (248) 446-4100 Fax: (248) 446-4200 Louisville, Kentucky 2726 River Green Circle Louisville, Kentucky 40206 Phone: (502) 893-3889 Fax: (502) 893-3830 San Jose, California 3081 North First Street San Jose, California 95134 Phone: (408) 432-0990 Fax: (408) 432-0996 Canada 1155 North Service Road West, Suite #4 Oakville, Ontario L6M 3E3 Phone: (905) 465-0880 Fax: (905) 465-1221 Mexico Av. Vallarta #6503 Local B 9 Concentro Zapopan, Jalisco 45010, Mexico Phone: (52) 33 3110-1895 Fax: (52) 33 3110-1897...

Open the catalog to page 6