Datasheet SKYREEF Green

Product catalog summary

Specifications:
The document outlines specifications for the All-Electric GREEN series blow molding machines, including models 5S, 5D, 20S, and 20D. Key specifications include:

Mold Dimensions: Maximum width of 270 mm for 5S and 5D, and 470 mm for 20S and 20D. Maximum length is 320 mm for 5S and 5D, and 500 mm for 20S and 20D. Minimum thickness is 2x 120 mm for 5S and 5D, and 2x 160 mm for 20S and 20D.
Mold Weight: Maximum of 2x 65 kg for 5S and 5D, and 2x 200 kg for 20S and 20D.
Shuttle Stroke: Ranges from a minimum of 240 mm to a maximum of 580 mm depending on the model.
Clamp Stroke: Maximum of 180 mm for 5S and 5D, and 260 mm for 20S and 20D.

Procedures:
The document specifies the clamping and calibration forces, with clamping force at 60 kN for 5S and 5D, and 120 kN for 20S and 20D. Calibration force is 15 kN for 5S and 5D, and 20 kN for 20S and 20D. The dry cycle time is 1.8 seconds for 5S and 5D, and 2.5 seconds for 20S and 20D.

Utilities:
Air consumption is dependent on article volume and throughput, with required utility air pressure between 8-10 bar for all models.

Cooling Performance:
Cooling performance for blow mold and extruder feed zone is specified for HDPE/HMPE at 850 units.

Additional Information:
The document notes that all descriptions, pictures, data, and dimensions are not binding, and Kautex Maschinenbau GmbH reserves the right to change designs and specifications without notice. The document is dated 14th April 2021.

Catalog excerpts

Technical Details - SKYREEF GREEN Mold Width Length* Thickness Mold weight Shuttle stroke Daylight between platens Clamp stroke Blow Molding Machine Clamping force Calibration force Dry cycle time ** Approximate Utilities Air consumption - according to article volume and throughput Air pressure (required utility air bar pressure) Cooling performance for blow mold and kj/h extruder feed zone HDPE/HMPE kg/h * Mold Length Including Superstructure Maximum Center Distance ** Sum of movements, independent from the process All descriptions, pictures, data and dimensions are not binding. Kautex Maschinenbau GmbH reserves the right to change designs and specifications without notice.

Open the catalog to page 1

All Kautex Maschinenbau GmbH catalogs and technical brochures

Archived catalogs

Virtual Machines
1 Page
BC Connect
1 Page