RRU 4570 Reader Unit
2Pages

RAIN RFID Reader Systems | Page 1 of 4 RRU 4570 Reader Unit RAIN RFID Reader Systems | Page 2 of 4 RRU 4570 Reader Unit The Kathrein RRU 4570 reader is the next generation of RAIN RFID readers and the leading IoT device for all professional AutoID solutions. It is the first choice for professional AutoID solutions, such as industrial automation and vehicle dentification in ruggedised environments. Its best-in-class 33-dBm UHF RF unit, embedded 4G mobile interface and the powerful scalable processing unit change the way identification works. Based on the latest RFID standards, such as EPC Gen2v2/ISO 18000-63, Kathrein RRU 4570 reader supports all market leading transponder chip features for security, authentification and encoding. General Specifications ETSI Version Order number RFID Frequency range Impedance antenna port Features ▪ ruggedised high-end RAIN RFID reader ▪ powerful IoT gateway ▪ enhanced RF design ▪ integrated high secure memory module ▪ 4 antenna ports ▪ +33 dBm port power ▪ @KRAI antenna support ▪ GPIO ▪ PoE+ ▪ 2G/3G/4G wireless interface ▪ basic computing module ▪ embedded dual-core 800 MHz PC ▪ open source Linux OS ▪ advanced LED visualisation ▪ IP67 outdoor use ▪ type approval for Europe 30 (33 dBm with extended cable length) 36 Number of antenna ports Voltage Local supply Connector Remote feed ▶ Make sure that the router/switch supports 30 W in the static mode. ▶ Use the cable the length of which does not exceed 100 m. ▶ Make sure to use a Cat 6 cable or a higher level cable. ▶ Note that the internal supply of GPIO-VCC-pin is not possible with PoE+. M12, X-coded, 8-pole, port 1 only Power consumption Local supply Remote feed ▪ Manufacturing and Automotive ▪ Logistics ▪ Track & Trace ▪ Intelligent Transportation Systems ▪ Healthcare ARMv7-A based processor, 2 cores @ 800 MHz Flash memory (eMMC) KATHREIN Solutions GmbH, Kronstaudener Weg 1, 83071 Stephanskirchen, Germany Phone +49 8036 90831-20 | Fax +49 8036 90831-69 | www.kathrein-solutions.com | info@kathrein-solutions.com Risk of material damage! ► Make sure that the depth at which the screws are put into the housing of the reader does not exceed 10 mm (the tightening torque is 5 Nm). Supply voltage (output) Max. current per port 936B133/F/0719 | Subject to change. Number of Ethernet ports Operating system LED visualisation Freely programmable Fixed KATHREIN Solutions GmbH, Kronstaudener Weg 1, 83071 Stephanskirchen, Germany Phone +49 8036 90831-20 | Fax +49 8036 90831-

RAIN RFID Reader Systems | Page 3 of 4 RRU 4570 Reader Unit RAIN RFID Reader Systems | Page 4 of 4 RRU 4570 Reader Unit General Specifications Power Supply ETSI Version Order number Frequency range UMTS/HSPA (dependent on class and modulation) 2G/3G/4G Frequency range GSM/GPRS/EDGE Pinout Power Supply M12, X-coded, 8-pin, female Max. input voltage Max. current per output port Max. current over all outputs Operating system Flash memory eMMC ARMv7-A based processor with 600 MHz RFID controller Pinout communication PoE+ Mechanical properties Weight Operating temperature range Storage...