RAIN RFID Reader Systems | Page 1 of 4 RRU 4560 Reader Unit RAIN RFID Reader Systems | Page 2 of 4 RRU 4560 Reader Unit The Kathrein RRU 4560 reader is the next generation of RAIN RFID readers and the leading IoT device for all professional AutoID solutions. It is the first choice for professional IoT solutions, such as industrial automation and vehicle identification in ruggedised environments. Its best-in-class 33-dBm UHF RF unit, embedded BLE and WiFi connectivity modules, and the powerful scalable processing unit change the way identification works. Based on the latest RFID standards, such as EPC Gen2v2/ISO 18000-63, Kathrein RRU 4560 reader supports all market leading transponder chip features for security, authentification and encoding. General Specifications Type Order number ruggedised high-end RAIN RFID reader powerful IoT gateway enhanced RF design integrated high secure memory module 4 antenna ports +33 dBm port power @KRAI antenna support GPIO PoE+ Wi-Fi Bluetooth basic computing module embedded dual-core 800 MHz PC open source Linux OS advanced LED visualisation IP67 outdoor use* type approval for Europe, US and RoW Frequency range Impedance antenna port 30 (33 dBm with extended cable length) 36 Number of antenna ports Voltage Local supply Connector Remote feed ▶ Make sure that the router/switch supports 30 W in the static mode. ▶ Use the cable the length of which does not exceed 100 m. ▶ Make sure to use a Cat 6 cable or a higher level cable. ▶ Note that the internal supply of GPIO-VCC-pin is not possible with PoE+. M12, X-coded, 8-pole, port 1 only Power consumption Key Applications Manufacturing and Automotive Logistics Track & Trace Intelligent Transportation Systems Healthcare Remote feed ARMv7-A based processor, 2 cores @ 800 MHz Flash memory (eMMC) Operating system Ethernet Number of Ethernet ports Datarate Risk of material damage! ► Make sure that the depth at which the screws are put into the housing of the reader does not exceed 10 mm (the tightening torque is 5 Nm). KATHREIN Solutions GmbH, Kronstaudener Weg 1, 83071 Stephanskirchen, Germany Phone +49 8036 90831-20 | Fax +49 8036 90831-69 | www.kathrein-solutions.com | [email protected] Local supply Embedded PC ETSI Version Supply voltage (output) LED visualisation Freely programmable Fixed KATHREIN Solutions GmbH, Kronstaudener Weg 1, 83071 Stephanskirchen, Germany Phone +49 8036 90831-20 | Fax +49 8036 90831-6

RAIN RFID Reader Systems | Page 3 of 4 RRU 4560 Reader Unit RAIN RFID Reader Systems | Page 4 of 4 RRU 4560 Reader Unit General Specifications Power Supply Type Order number ETSI Version Wi-Fi Supported standards Max. TX power (dependent on country) Frequency range 4 inputs, 4 outputs (double insulation possible) 30 Max. current per output port Max. current over all outputs ARMv7-A based processor with 600 MHz GPIO Max. input voltage 5 GHz band Max. TX power (dependent on country) Pinout Power Supply Pinout communication PoE+ Pin RFID controller Flash memory eMMC Operating system GPIO M12, A-coded,...