RMG 4015 Crack Depth Measurement

RMG 4015 Principle of Measurement You are looking for an easy-to-use instrument to bines current generation, measurement technique measure the depth of surface cracks in metals which you have detected by e.g. Magnetic Particle taken along conveniently to any job site. Testing (MT) or Penetrant Testing (PT)? You want The RMG is optimized for the use on steel, iron to evaluate the extension, the orientation or the and austenitic material. A material specific calibra- inclination angle of the crack so you are able to tion adapts the instrument to distinct electrical make a decision on a possible...

All RMG properties at a glance • Ideal accessory for MT or PT • Small, battery-operated mobile instrument • Low weight (225 g / 8 oz) • Display of the crack depth in mm or inch • Menu-guided operation • Crack depth measurement also for inclined cracks in ferromagnetic material; resolution of 10° in steel is possible • Orientation of inclined cracks determinable with special probe setup • Robust probe design • Easy choice of the right probe: Three standard probes are suitable for most workpieces • Special probes for surfaces of complex shape and difficult to access crack locations Sturdy, exchangeable...

Accessories RMG reference block (0-10 mm crack) Charger (230 V) for inserted rechargeable batteries Rechargeable battery set NiMH (2x1.2 V, size AA) External charger 230 V for NiCd/NiMH batteries (4 x size AA) Matrix printer (incl. 230 V mains unit, paper roll, printer ribbon) Printer cable RMG 4015 for matrix printer 6010 PC cable RMG 4015 for RS232C interface (PC) Fitting tool to replace probe contact pins Protective bag for RMG 4015 Literature: Crack depth measurement by Prof. Dr. V. Deutsch Order no. Crack depth gauge RMG 4015 4015.003Probes (incl. 1 set spare standard contact pins) Crack...