Stationary Magnetic Particle Crack Detector DEUTROFLUX EW (SV) P:\Verkauf\Produktinformationen\DEUTRO\DEUTROFLUX\EW\PI EW e 2004 03.doc 30.03.2004 DEUTROFLUX EW with built-in control panel and manual clamping Additional accessories on request The table set (machine without machine column) is equipped with the following items: • Sturdy lightweight construction with stainless steel tub • 2 independent magnetising circuits for combined magnetisation (i.e. detection of cracks in all directions in one testing cycle) • 4 settings for current and field flow • Built-in control panel • Separate container for testing agent, 40 l volume, incl. feed and circulating pump with dosing valves and feeding hoses • Manual pre-setting of clamping length • Manual spraying (by hose) • Relative operating factor 30 % • Separate foot-switch to activate magnetisation • 5 l FLUXA-concentrate HRS, art.-no. 9306 sufficient for 4-5 fillings of testing agent container • 3 operation manuals in English or German KARL DEUTSGH DEUTROFLUX EW 300 with machine column Technical Data: Clamping length (mm) Workpiece weight, max. (kg) Current flow Nominal current (A) 1000 Mains voltage (three-phase current) (V) Connected load (kVA) Phase current, max. (A) Outside dimensions without machine column: (mm) 1900 x 730 x 570 2050 x 730 x 570 Bath container Operating height with machine column: (mm) 1000 1000 Weights, approx. Crack Detector (kg) 320 Increased current flow is necessary KARL DEUTSCH Prnf- und Messgeratebau GmbH+Co KG ■ Otto-Hausmann-Ring 101 ■ D-42115 Wuppertal ■ Tel. (+49 -202) 71 92 - 0 - Fax (+49 -202) 71 49 32 ■ e-mail: [email protected]