1. Catalogs
  2. Kappa optronics
  3. Digital GigE Vision X-Ray Camera Module
video corpo

Digital GigE Vision X-Ray Camera Module

Digital GigE Vision X-Ray Camera Module

Digital GigE Vision X-Ray Camera Module

Product catalog summary
Introduction
The HiRes3-XR is a high-resolution CCD camera developed by Kappa opto-electronics specifically for radiological applications. It represents a significant advancement over conventional video CCD cameras, offering a fully digital design suitable for high-end X-ray applications. Its modular design with miniaturized components allows for optimized integration into X-ray processing systems, and it can be easily adapted to an image intensifier.
Key Features
  • Modular Design: Flat design for integration in X-ray c-arms.
  • Video Gain Control: Automatic (AGC) or fixed, with adjustable control functions.
  • Frame on Demand Mode: Synchronization with X-ray generator.
  • Circular Blanking: Adjustable in diameter and location.
  • Shading Correction: Adjustable horizontally and vertically to minimize vignetting.
  • Gamma Corrections: Compensates for non-linearity of the X-ray intensifier.
  • Edge Enhancement: Improves image sharpness.
  • Histogram Equalization: Enhances contrast.
  • Frame Rate: 30 fps (full screen).
  • Noise Reduction: Recursive filter with factors 2, 4, 8, 16 and "Auto Motion Detection".
  • Last Image Hold: Stores the last image in digital memory.
  • Image Flip: Horizontal and vertical flip options.
  • Negative Image: Available.
Technical Specifications
  • Sensor: Interline transfer CCD with microlenses, 1024 x 1024 picture elements, 5.5 μm x 5.5 μm size.
  • Sensor Format: 1/2" with a light-sensitive area of 5.632 mm x 5.632 mm.
  • Quantum Efficiency: Max 50% at 500 nm.
  • Spectral Sensitivity: 300 nm to 1000 nm.
  • Full Well Capacity: 20,000 e¯.
  • Readout Noise: 12 e¯ rms.
  • Signal/Noise Ratio: 62 dB.
  • Signal Processing: 14-bit digital signal processing, asynchronous image capture and readout, bad pixel compensation for up to 32 pixels.
  • Interfaces: GigE Vision output, digital I/Os via optocoupler, C-Mount lens.
  • Power Supply: 12 V – 32 V DC, 4 W.
  • Operating Temperature: -20°C to +60°C.
Contact Information
Kappa optronics Inc., Monrovia, CA, USA. Phone: +1.626.256.4343, Email: [email protected]
Kappa optronics GmbH, Gleichen, Germany. Phone: +49.5508.974.0, Email: [email protected]
See more

Catalog excerpts

Digital GigE Vision X-Ray Camera Module-1

CCD Camera for X-Ray Imaging Progressive scan CCD 30 fps 14 bit real time signal processing (DSP) Especially for radiological applications Kappa opto-electronics has developed the high resolution CCD camera series HiRes3XR. It marks a major advance in contrast to conventional video CCD cameras and pickup devices. This camera series offers the latest technology. The fully digital designmeets the demands of high-end X-ray applications. A special modular design with miniaturized components allows an optimized integration into the X-ray processing chain. In connection with X-ray optics the camera can be adapted easily to an image intensifier. The camera comes with reduced power consumption. GigE Vision Number of picture elements: 1024 (H) x 1024 (V) Size of picture elements: 5.5 μm x 5.5 μm Image area: 5.632 mm (H) x 5.632 mm (V) HiRes3-XR will support your application Modular design very flat design for an integration in X-ray c-arms Video gain control can be done automatically (AGC) or fixed. In case of AGC, different control functions can be adjusted. Frame on demand mode the camera is synchronized with the X-ray generator Circular blanking adjustment in diameter and location Shading correction horizontally and vertically adjustable to minimize image intensifier vignetting Gamma corrections compensates the non-linearity of the X-ray intensifier Edge enhancement function for more sharpness Histogram Equalization function for more contrast enhancement Recursive filter factors 2, 4, 8, 16 for noise reduction is integrated, “Auto Motion Detection” Last image hold stores the last image in the digital image memory Horizontal and Vertical image flip Negative image realize visions

 Open the catalog to page 1
Digital GigE Vision X-Ray Camera Module-2

CCD Camera for X-Ray Imaging HiRes3-XR Technical Data Sensor Sensor interline transfer CCD progressive scan with microlenses Number of picture elements Size of picture elements Sensor format Light-sensitive area Quantum efficiency Spectral sensitivity Full well capacity Readout noise Signal/Noise ratio 62 dB (measured in dark image at 33 ms integration time and 0 dB gain) Signal Processing System 14 bit digital signal processing Asynchronous image capture and readout Frame rate Shading correction horizontal and vertical, tilt and dome correction Circular blanking yes, adjustable diameter and...

 Open the catalog to page 2

All Kappa optronics catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.