Heatex®
Heatex®
The document describes a heat exchanger system known as HEATEX®, highlighting its compact design and ease of mechanical cleaning. It features a welded plate pack within a cubic frame, protected by a European patent, and offers technological innovations for efficient pressurization and easy maintenance.
Construction Principle
The system consists of a cubic bundle inserted into a frame with four columns and two bases. Each circuit has two doors for full access to the transfer area, enhancing maintenance and inspection capabilities.
Accessibility and Maintenance
The heat exchanger is designed for total accessibility with four hinge-mounted doors allowing rapid access to both circuits. The cleaning depth is less than 625 mm, and all welds are inspectable.
Types of Circuits
- HXS: Two rectangular free-gap circuits with studs.
- HXE: One free gap circuit and one dimpled circuit.
- HXC: Two corrugated circuits or a combination of a free gap corrugated circuit and one corrugated circuit.
Selection Criteria
- Compact design with 200m²/m³.
- Maximum pressure of 35 bar and temperature of 350°C.
- Exchange area up to 700 m² with a single module.
- Mechanical cleaning possible on one or two circuits.
- Channel widths range from 3 to 40 mm.
- Suitable for monophase, condensation, or evaporation operations.
- Design complies with AD-MERKBLATT, CODAP, EN13445, or ASME standards.
- Manufactured from stainless steel, duplex, nickel alloys, or titanium.
- CE marking in accordance with European norms (PED 2014/68/EU).
Catalog excerpts
HEATEX® EXCHANGER A welded plate pack in a cubic frame • Compact • Easy mechanical cleaning • 4 doors for full access A European patent A technological innovation allowing : • A total recovery of end effects associated with the pressurization of the unit • Easy attachment of the bundle onto the frame • A totally accessible transfer area Construction principle The cubic bundle is inserted into a frame composed of 4 columns and 2 bases. Each circuit is equipped with 2 doors providing access to the entire tran
Open the catalog to page 1
Total accessibility • The 4 doors may be hinge-mounted to provide rapid access to both circuits for maintenance purposes • The cleaning depth is less than 625 mm • Both circuits are accessible, all welds can be inspected HXS : Two rectangular free-gap circuits equipped with studs. HXE : - A free gap circuit, - A dimpled circuit : - A free gap corrugated circuit, - One corrugated circuit Selection criteria : • • • • • • • • • • • Compact design 200m²/m3 Maximum pressure 35 bar Maximum temperature 350°C Exchange area up to 700 m² with one single module Mechanical cleaning on one or two circuits...
Open the catalog to page 2All Kapp catalogs and technical brochures
PASP HEAT EXCHANGERS2 Pages
S-TYPE HEAT EXCHANGER2 Pages
