Kapotek tubular filter elements

Product catalog summary

Tubular Filter Elements Overview
Kapotek offers new and spare tubular filter elements compatible with Ronningen–Petter® / Eaton systems. These elements are available in single, Tri-Cluster, and Accuflux 28 configurations, made from materials such as wire mesh, fabric, sintered mesh, or slotted designs, with various retention options.

Model and Material Options

Fabric Element: Available in Dacron, PYL, or other materials. Specify retention and model.
Single 2236: Options include slotted, wire mesh, or sintered mesh. Specify media and retention.
Tri-Cluster: Available in slotted, wire mesh, or sintered mesh. Specify media and retention.
Accuflux 28: Options include slotted, wire mesh, or sintered mesh. Specify media and retention.

Maintenance and Inspection Recommendations

Ensure the flow meets required levels.
Check if the pressure drop (ΔP) returns to 0.1 - 0.3 bar after backwashing.
Verify that the full open area is available and inspect for worn slots or holes.
Examine the element surface for wear, cracks, or tears.
Use a feeler gauge to check slot size and ensure it meets process protection needs.
Contact Kapotek for assistance if necessary.

Regular inspection and cleaning of filter elements are recommended to maintain optimal performance and extend the time between cleaning cycles.

Catalog excerpts

Kapotek Tubular Filter Elements New and spare elements that fit Ronningen–Petter® / Eaton tubular backwashing filter systems—single, Tri–Cluster and Accuflux 28 elements in wire mesh, fabric, sintered mesh or slotted and in various retentions

Open the catalog to page 1

From time to time it is recommended to inspect the condition of your filter elements. Make sure they are clean and offer the full open area. Only a clean element will guarantee a good run time between cleaning cycles. If needed, check the slot size with a feeler gauge and make sure it is what is needed to protect the process or process conditions. • Do you reach your flow needed? • Does the AP return after backwash to about 0,1 - 0,3 bar? • Is all open area still available? • Are the slots/holes possibly worn? • Check the element surface for possible wear cracks or tears • Call us for help, if needed!...

Open the catalog to page 2

All KAPOTEK OY catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list