Years of expertise & industry knowledge have created a transformed flexible connector.

HOSE CLAMPED FABRIC SLEEVE Transformed BFM INTEGRATED SYSTEM ® Traditional HYGIENE Powder leaks through hose clips Leak free – Dust free Inaccurate measurements & product variations create ill-fitting connections Perfect fit every time – only in the correct place Connectors are made any sizes – thousands of stock variations possible Diameters every 50mm from 100mm to 1650mm Tools can damage connectors Tool free – snap fit Build up between spigot and connector Installation problems due to variation in fabrication HEALTH & SAFETY EXPLOSION RESISTANT Installer’s hands at risk No crevices to collect...

BFM® Global Product CLEAR URETHANE CONNECTORS / STATIC DISSIPATIVE MATERIAL SEEFLEX 040E CONNECTOR (NON PERMEABLE) • Temperature Range: -25°C to 110°C and Surge Temperature 120°C • Material Resistance: 1010 Ω • Clear ether based polyurethane • Seeflex 040E has no memory and will not fracture with flexing • Atex Compliant: IBExU tested • Regulations: FDA CFR 177.1680. & 177.2600 (EC) 1935/2004, 2023–2006, 2002/72, 10/2011 & USDA & 3A (20-) SEEFLEX 020E CONNECTOR (NON PERMEABLE) • Temperature Range: -25°C to 80°C and Surge Temperature 100°C • Material Resistance: 1010 Ω • Clear ether based polyurethane...

BFM® Spigots PATENTS AND REGISTERED DESIGNS APPLIED FOR © 2006 ALL RIGHTS RESERVED DESIGN GUIDELINES: When defining the connection first determine the diameter and the connector length (CL). Then calculate the installation gap (IG), based on application; static, offset or oscillating as indicated below. See connector table for spigot diameter. For Example; - 200mm Diameter. - 300mm Connector length (CL) selected. - oscillating application. Gives CL = 300mm so IG = 300mm - 40mm (from below) = 260mm (Max.) IN-LINE STATIC EQUIPMENT OFF SET EQUIPMENT OSCILLATING EQUIPMENT Inside Diameter in mm 0...