![KAO MING - logo](https://img.directindustry.com/images_di/logo-p/L33390.gif)
Catalog excerpts
![KMC-M - 1](https://img.directindustry.com/pdf/repository_di/33390/kmc-m-807585_1m.jpg)
STRONGER PERFORMANCE BREAK INTO THE NEW STANDARD OF PERFECTION KNIC-NIDOOBLE COLUMN HAUL 77 CENTER KMC-M series is designed to meet the needs of multi-face machining for larger LCD molds and complex machine construction all in one single setup. That increases productivity and lowers cost. All the three-axis travels are fully supported by box ways, ensuring machine rigidity and stability. The three axes have larger travel ranges with up to 1100 mm (43.3") for the Z-axis. Strong columns and cross beam give higher rigidity to the machine structure. The machine base is designed with four box ways to support its combined sliding and rolling design. The central box ways for main support is hardened, ground and covered with Turcite-B, which features strong absorption capability, enhancing its dynamic rigidity. Moreover, the two-side box ways, which are similar to central box ways, also employ extra roller type recirculating bearings to strengthen the support. This design can evenly distribute the loading with better tolerance. The table is rib-reinforced for optimum level of rigidity. The Y axis utilizes a superior design with a 70 mm (2.76") offset between the lower and upper slide ways. This greatly enhances the rigidity. A properly pre-loaded and pre-tensioned, large diameter ball screw is used for the three axes. The X oxis has a hollow ball screw with oil cooling system and is equipped with an air cooling system for the ball screw bearings, ensuring higher positioning accuracy. The mounting brackets for the Y and Z-axis ball screws are integrated with the saddle and cross beam t< further maximize rigidity. All three axes utilize an external feedback pulse coder for positioning. The pulse coder is coupled to tl opposite end of the ball screw and sends feedback to servo system directly. This allows for high positioning accuracy. Mechanical safety couplings are used where the drive motors and the ball screws get connected. These devices greatly minimize damage that may occur during a collision or an overload condition. The specially designed unclamping tool cylinder totally eliminates any outside forces from being applied to the spindle bearings when releasing the tool. Tool magazine is driven by a hydraulic indexing motor and the arm is rotated by a hydraulic swinging motor for stable and rapid reactions. Coolant through spindle system (Optional) can clean the chips during high speed cutting in order to restrain heat. The spindle head is hydraulically clamped to the curvic coupling. With optional DATA SERVER and AICC II high speed processor for accurate With optional “ Look Ahead B pre-setting function.
Open the catalog to page 1![KMC-M - 2](https://img.directindustry.com/pdf/repository_di/33390/kmc-m-807585_2m.jpg)
The Y axis utilizes a superior design with a 70 mm (2.76") offset between the lower and upper slide ways. This greatly enhances the rigidity of the headstock by bringing the center of gravity back into the upper support, which rests on the top massive columns. This design provides an extremely stoble foundation for the spindle head to travel and further enhances the machine performance when doing heavy cutting. EXTERNAL AXIS POSITION FEEDBACK All three axes utilize an external feedback pulse coder for positioning. For machine models over 3000m, the ball screw is driven by a motor and a...
Open the catalog to page 2![KMC-M - 3](https://img.directindustry.com/pdf/repository_di/33390/kmc-m-807585_3m.jpg)
POWERFUL, HIGH SPEED ATC CONVENIENT TOOL LOADING SYSTEM Tool loading and unloading can be performed at either the spindle or tool storage magazine. A foot pedal is provided at both locations allowing for easy handling of even larger tools. CUTTING EXAMPLE (HORIZONTAL ANGULAR) Face Mill Cutter j 0125 AUTOMATIC TOOL CHADIGER The ATC-H (Horizontal) is integrated into the original ATC-V (Vertical), which features simple construction and innovative design. The 2-position AAC (Automatic Attachment Changer) is designed to improve productivity. The angular attachment and vertical head cap are...
Open the catalog to page 3![KMC-M - 4](https://img.directindustry.com/pdf/repository_di/33390/kmc-m-807585_4m.jpg)
KMTCS is using unique integrated techniques for the intelligent spindle cooler with thermo-compensation card and PLC software. The system is keeping the spindle at a constant temperature by program when the spindle temperature rises or falls at different working speeds. For high speed machining at fixed spindle revolution, such as for finish machining of die/mold, KMTCS is essential to offer stable and accurate performance. Moreover, in this case, it is possible to control the spindle elongation deviations within 0.02mm or even 0.01mm under specific conditions. The other thermo-compensation...
Open the catalog to page 4![KMC-M - 5](https://img.directindustry.com/pdf/repository_di/33390/kmc-m-807585_5m.jpg)
Specifications ITEM CNCCONTROLLER| FANUC SERIES, (‘SIEMENS), (‘HEIDENHAIN) Option: Design specifications are subject to change without prior notice. (()) Max. tool diameter (without adjocent tools) Distance between two columns F=2800 mm, G=3200 mm, H = 3600 mm STANDARD ACCESSORIES © Coolant equipment Centralized automatic lubrication system © Rigid tapping © Splash guard Adjusting tools and box (Iset) © Manual and electrical drawing (lset) Leveling and foundation fittings © Work light © Spindle cooling system (Chiller unit) © Alarm lamp © Air blast © Automatic power off © Operation finish...
Open the catalog to page 5![KMC-M - 6](https://img.directindustry.com/pdf/repository_di/33390/kmc-m-807585_6m.jpg)
®KAO AAlAl G ONE MORE STEP TO EXCELLENCE KAO MING MACHINERY INDUSTRIAL CO., LTD. http: //www .kaomi ng .com HEAD OFFICE No.861, Sanfong Rd., Fongyuan District, Taichung City, 42073 Taiwan. CTSP No.53, Houke S. Rd., Houli District, Taichung City, 42152 Taiwan. TEL: +886-4-25577650 FAX: +886-4-25577630 E-MAIL: km@kaoming.com.tw DOUBLE COLUMN MULTI CENTER KAO MING MACHINERY INDUSTRIAL CO., LTD.
Open the catalog to page 6All KAO MING catalogs and technical brochures
-
KMC-1100VL
2 Pages
-
KMC-DV
8 Pages
-
KMR
4 Pages
-
Vertical Machining Center
7 Pages
-
KMC 3000 SV
10 Pages
-
KMC-G
6 Pages
-
KMC-SR-H/SR
12 Pages
-
KMC-RF
10 Pages