Series 800 and 1000 Tubular Resistors Product Information

Series 800 and 1000 Tubular Non-Inductive Bulk Ceramic Resistors provide excellent performance for high peak power or high-energy pulses. Bulk construction advantageously produces an inherently non-inductive resistor; and it allows energy and power to be uniformly distributed through the entire ceramic resistor body - there is no film or wire to fail. We offer a full line of rugged, reliable ceramic resistors. We offer three distinctly different ceramic materials to afford the designer with unique components to meet the most demanding requirements: Type SP resistors are composed of materials...

Series 800 and 1000 Tubular Resistors are available in a wide variety of sizes and terminations from 2" to 24" in length and V" to 2" in diameter. These resistors can handle up to 1000 watts, 165 kJ and 165 kV in resistance values from 1 ohm to 1 megohm. Length and Diameter Type Resistance Available (ohms) Min. to Max. Peak* Energy (joules) * Allowable peak energy/voltage will depend on the resistance value. Consult factory. ** Derate by 50% with oil resistant coating on Type AS resistors. Energy ratings are based on pulses <10 milliseconds. Type SP ratings can be substantially greater for longer...

Termination Metals Electrical connection to the resistive bodies of resistors is made by metal end bands. The standard metal is aluminum for Type SP, silver for Type AS and nickel for Type A. Special terminations of brass, copper or soldered ends are also available. Mounting Clips In most cases, connections to the resistors may be made by using these stock clips. Material: Beryllium Copper Finish: Electro Tin Plate —(2) Threaded Holes- Each Side Maximum Insertion Length Dimensions - InchesPart Resistor od No. Diameter OD-1 W E ID ABC Threaded Holes 36075 3/4 1 1/2

Optional No-Arc Termination “N” Suffix Overall Resistor Same as as Standard Overall Resistor Same Standard Resistor Length 1/16 Resistor Length 1/16 D2D2 Dimensions – Inches Optional Radial Tab Termination “G1” suffix - riveted only “G” suffix - riveted with solder Overall Length = L = 1/16" Overall Length L 1/16" Same as Standard Resistor Length Same as Standard Resistor Length Diameter = D D 1/32" Diameter = 1/32" Same as Standard Same as Standard Resistor Diameter Resistor

Resistance Temperature Coefficient Voltage Coefficient Max. % per kilovolt per inch active length Short Time Overload ax. % change after 10 cycles of 1000% rated M power 5 sec. On, 90 sec. Off Load Life Max. % change after 1,000 hours at rated power Thermal Shock Max. % change after 10 cycles -55°C to +125°C Moisture Resistance ax. % change when tested per MIL-STD-202, M Method 103 (1) Note: When required, Type SP material can withstand short periods of use at red-heat conditions, i.e. up to 550°C to 600°C Typical Physical Properties Specific Heat Power ratings are based on maximum allowable...