Exhibit with us
*mydirectindustry  
English
  1. Catalogs
  2. Kant Druckschalter GmbH
  3. TYPE 701

TYPE 701

TYPE 701
1 / 1 PageView full catalog

TYPE 701

Product catalog summary
Product Overview:
The Kant Druckschalter GmbH Type 701 is a vacuum switch equipped with a changeover switch. It is designed for applications involving hydraulic oil, machine oil, heating oil, nitrogen, and seawater.

Specifications:
  • Dimensions: Width across flats 19mm, Height 90mm, Thread length 9mm, Diameter 45mm.
  • Adjustment Range: 0.05 – 1 bar with an overpressure safety of 10 bar.
  • Reproducibility: Approximately 5%.
  • Type of Protection: IP 55.
  • Hysteresis: Approximately 0.02 – 0.05 bar.
  • Permissible Temperature: -20° to +100°C.
  • Switching Frequency: 200/min.
  • Weight: 0.29 kg.
  • Switching Element: Changeover contact.
  • Media Resistance: Suitable for air, oil, and gas.
  • Voltage: 250 Volt.
  • Electricity Max: 5 Amp.
  • Material: Body made of Aluminum (Al), Connection made of Copper-Zinc (CuZn).

Connection Details:
  • Thread: G 1/4.
  • Sealing Element: NBR 1.
  • Device Connector: PG9 DIN 43650.

Functionality:
The vacuum switch operates by deforming a diaphragm when a specific negative pressure is applied. This deformation is influenced by an adjustable spring preload. Upon reaching the switching point, the diaphragm's movement actuates the switch, thereby opening or closing the electrical circuit. This allows for monitoring specific pressure values through the switching signal.

Customization Options:
  • Body Material: Aluminum (ALU).
  • Microswitch Options: Standard or waterproof with gold-plated contacts.

Order Number Example:
701-XX-2155, where each segment represents a customized version, material, sealing element, thread, setting range, and type.
See more

Catalog excerpts

TYPE 701-1

A Kant vacuum switch Type 701 has an integrated electric change over switch. When a specific negative pressure is applied, a diaphragm is deformed. The deformation depends on an adjustable spring preload. When the switching point is reached, the diaphragm has undergone a defined movement which actuates the switch and opens or closes the electrical circuit. Specific pressure values can be monitored via the switching signal. Vacuum switch with changeover switch Width across flats 19 Height 90mm Thread length 9mm Diameter 45 OVERPRESSURE SAFETY ORDER NUMBER PERMISSIBLE TEMP. SWITCHING FREQUENCY SWITCHING ELEMENT Changeover contact MEDIA RESISTANCE Body: Al ; Connection: CuZn Hydraulic oil, Machine oil, Heating oil, Nitrogen, sea water D MICROSWITCH WITH GOLD PLATED CONTACTS WATERPROOF MICROSWITCH WITH GOLD PLATED CONTACTS The Open, Close or Change function refers to increasing negative pressure.  Order Number Example: ABCD 701-XX-2155 Kant Druckschalter GmbH · Maybachstr. 18 · 72175 Dornhan · Tel +4974559461-0 Fax +4974559461-13 · Email [email protected] · www.kant-druckschalter.de Customized version Material Sealing element Thread Setting

 Open the catalog to page 1

All Kant Druckschalter GmbH catalogs and technical brochures

  1. Type 903/953
    Type 903/953

    2  Pages

  2. TYPE 902
    TYPE 902

    1  Page

  3. TYPE 809 and 810
    TYPE 809 and 810

    1  Page

  4. TYPE 807 and 808
    TYPE 807 and 808

    1  Page

  5. TYPE 803 and 804
    TYPE 803 and 804

    1  Page

  6. TYPE 702
    TYPE 702

    1  Page

  7. TYPE 606
    TYPE 606

    1  Page

  8. TYPE 605
    TYPE 605

    1  Page

  9. TYPE 603
    TYPE 603

    1  Page

  10. Type 801/802 and 851/852
    Type 801/802 and 851/852

    2  Pages

  11. TYPE 909
    TYPE 909

    1  Page

  12. TYPE 607
    TYPE 607

    1  Page

  13. TYPE 602
    TYPE 602

    1  Page

  14. TYPE 501
    TYPE 501

    1  Page

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.