A Kant pressure switch Type 607 has an integrated electric change over switch. When pressure is applied, a diaphragm is deformed or a piston is displaced via a lifting movement. The deformation or movement depends on an adjustable spring preload. When the switching point is reached, the diaphragm or piston has undergone a defined movement which actuates the switch and opens or closes the electrical circuit. Specific pressure values can be monitored via the switching signal. Pressure switch with changeover switch With M12 plug insert Width across flats 27 Height without connector 52mm Thread length 9mm OVERPRESSURE SAFETY ~ 20% ; smaller upon request SWITCHING ELEMENT Changeover contact PERMISSIBLE TEMP. SWITCHING FREQUENCY Hydraulic oil, Machine oil, Heating oil, Nitrogen, sea water Hydraulic fluids, Petrol, Alcohol, Salt and Sulphuric acid EPDM (APTK) Hydrogen, Brake fluid, Acetylene, etc. PISTON SEALING PISTON SEALING  Flat connector 6,3 DIN 46244  With device connector 600 with M12 plug insert Plug connection 6x60° pivotable MICROSWITCH WITH GOLD PLATED CONTACTS  Order Number Example: WATERPROOF MICROSWITCH WITH GOLD PLATED CONTACTS The Open, Close or Change function refers to increasing pressure. Kant Druckschalter GmbH · Maybachstr. 18 · 72175 Dornhan · Tel +4974559461-0 Fax +4974559461-13 · Email [email protected] · www.kant-druckschalter.de Customized version Material Sealing element