A Kant pressure switch Type 606 has an integrated electric change over switch. When pressure is applied, a diaphragm is deformed or a piston is displaced via a lifting movement. The deformation or movement depends on an adjustable spring preload. When the switching point is reached, the diaphragm or piston has undergone a defined movement which actuates the switch and opens or closes the electrical circuit. Specific pressure values can be monitored via the switching signal. Pressure switch with changeover switch Width across flats 27 Height 88mm Thread length 9mm OVERPRESSURE SAFETY ~ 20% ; smaller upon request SWITCHING ELEMENT Changer over contact PERMISSIBLE TEMP. SWITCHING FREQUENCY Hydraulic oil, Machine oil, Heating oil, Nitrogen, sea water Hydraulic fluids, Petrol, Alcohol, Salt and Sulphuric acid EPDM (APTK) Hydrogen, Brake fluid, Acetylene, etc. PISTON SEALING PISTON SEALING PG9 with strain relief MICROSWITCH WITH GOLD PLATED CONTACTS WATERPROOF MICROSWITCH WITH GOLD PLATED CONTACTS The Open, Close or Change function refers to increasing pressure. Kant Druckschalter GmbH · Maybachstr. 18 · 72175 Dornhan · Tel +4974559461-0 Fax +4974559461-13 · Email [email protected] · www.kant-druckschalter.de  Order Number Example: ABCD 606-XX-1260 Customized version Material Sealing element Threa