Pressure switch with changeover switch Flush diaphragm for highly viscous media Width across flats 27 Height 64mm Thread length 9mm With device connector 600 Without device connector OVERPRESSURE SAFETY ORDER NUMBER ~ 20% ; smaller upon request SWITCHING ELEMENT Change over contact PERMISSIBLE TEMP. SWITCHING FREQUENCY A Kant pressure switch Type 603 has an integrated electric change over switch. When pressure is applied, a diaphragm is deformed or a piston is displaced via a lifting movement. The deformation or movement depends on an adjustable spring preload. When the switching point is reached, the diaphragm or piston has undergone a defined movement which actuates the switch and opens or closes the electrical circuit. Specific pressure values can be monitored via the switching signal. B Sealing element FKM (VITON) Hydraulic fluids, Petrol, Alcohol, Salt and Sulphuric acid The Open, Close or Change function refers to increasing pressure. Optionally with device connector 600 PG9 with strain relief Plug connection 6x60° pivotable  Order Number Example: ABCD 603-XX-022 Material Sealing element Thread Setting range Type Kant Druckschalter GmbH · Maybachstr. 18 · 72175 Dornhan · Tel +4974559461-0 Fax +4974559461-13 · Email [email protected] · www.kant-d