TYPE 602
1Pages

Pressure switch with changeover switch Width across flats 27 Height without connector 52mm Thread length 9mm OVERPRESSURE SAFETY With non-detachable device connector 601 With device connector 600 Without device connector A Kant pressure switch Type 602 has an integrated electric change over switch. When pressure is applied, a diaphragm is deformed or a piston is displaced via a lifting movement. The deformation or movement depends on an adjustable spring preload. When the switching point is reached, the diaphragm or piston has undergone a defined movement which actuates the switch and opens or closes the electrical circuit. Specific pressure values can be monitored via the switching signal. ~ 20% ; smaller upon request SWITCHING ELEMENT Change over contact PERMISSIBLE TEMP. SWITCHING FREQUENCY Hydraulic oil, Machine oil, Heating oil, sea water Hydraulic fluids, Petrol, Alcohol, Salt and Sulphuric acid EPDM (APTK) Hydrogen, Brake fluid, Acetylene, etc. PISTON SEALING PISTON SEALING  Flat connector 6,3 DIN 46244  Optionally with device connector 600/601: PG9 with strain relief Plug connection 6X60° pivotable MICROSWITCH WITH GOLD PLATED CONTACTS WATERPROOF MICROSWITCH WITH GOLD PLATED CONTACTS The Open, Close or Change function refers to increasing pressure. Kant Druckschalter GmbH · Maybachstr. 18 · 72175 Dornhan · Tel +4974559461-0 Fax +4974559461-13 · Email info@kant-druckschalter.de · www.kant-druckschalter.de  Order Number Example: Customized version Material Sealing element