Catalogs >
Kanomax USA >
Remote Particle Sensor

Remote Particle Sensor
2Pages

Catalog excerpts

Remote Particle Sensor 2-channel remote particle sensors for facility monitoring applications Kanomax particle sensors with analog output are designed to fit into your existing monitoring system, or they can be used as a stand-alone unit to monitor a critical area when connected to an alarm or controller. The Kanomax particle sensor is available with both 0.1 and 1.0 CFM flowrates and also comes in two different ranges: 0.3 and 0.5 microns or 0.5 and 5.0 microns. Monitoring cleanrooms pharmaceutical / semiconductor / food industry Hospital surgical room Faciltiy monitoring Building automation system 2-channel particle sensor with flexible 4-20mA analog output (1.0 cfm unit only) 0.1 cfm and 1.0 cfm flow rates are available Particle counts, error status, and alarm signal can be outputted Able to connect to a PLC or datalogger for facility monitoring applications Can be added to a process or building automation system Fully compliant with ISO21501-4 calibration standard and JIS B9921 Configuration software is included for user parameter setup Power can be provided via a network connection or AC adapter Stainless steel enclosure 3 years warranty

Open the catalog to page 1

Specifications Model Light Source Laser diode Particle Channel Sizes Counting Efficiency 50% 20% at smallest particle channel Flow Rate More than 500,000 particles/ft3 at 10% coincidence loss Concentration Limit More than 1,000,000 particles/ft at 10% coincidence loss Zero Count Level Less than 1 count per 5 minutes Vacuum Source External pump Stainless Steel Particle counts, error status, alarm output Power Supply DC24V (over network hub) / 9 to 28V (AC adapter) Operating Range 50 to 86°F (10 to 30°C), 20 to 85%RH with no visible condensation Storage Range 14 to 122°F (-10 to 50°C), up to...

Open the catalog to page 2

Remote Particle Sensor 2Pages

Catalog excerpts

All Kanomax USA catalogs and technical brochures

Remote Particle Sensor
2Pages