*mydirectindustry

Dif-Kit

Product catalog summary

Features & Benefits
The document outlines the features and benefits of the Kanomax Dif-Kit, which is used for testing laboratory fume hoods according to the ANSI/ASHRAE 110-1995 standard. The Dif-Kit is designed for the Tracer Gas test and offers alternative tracer gas systems to minimize greenhouse gas emissions. Key features include a diffuser made to specific standards, a critical orifice ensuring a flow rate of 4 liters per minute, and a thermal anemometer for face velocity testing. A commercial fog machine is also included for flow visualization.

Tracer Gas Hardware
The Vapor Analyzer is a crucial component, factory calibrated for tracer gases with a response time of less than 10 seconds to reach 90% response. It stabilizes at maximum concentration in under 30 seconds.

Dif-Kit Specifications
The Dif-Kit includes a critical orifice with a flow rate of 4 liters per minute, a dual-stage specialty gas regulator, a calibrated flow meter, and a pressure gauge ranging from 0 to 60 psi. Specifications are subject to change without notice.

Vapor Analyzer Specifications
The Vapor Analyzer is a single beam infrared spectrophotometer with a sample flow of 10 liters per minute and a sample cell volume of 0.45 liters. It features a gas purge system, concentration alarms, and interfaces via USB or RS232. It is powered by a NiMH battery or 120-220V AC and weighs 18 lbs.

Fog Machine Specifications
The fog machine produces particles sized between 0.25 to 60 microns, with a maximum consumption of 1 liter per hour. It requires 120 volts, 50/60 Hz power and measures 14.3” x 5.6” x 7.5”.

Contact Information
Kanomax USA, Inc. is located at P.O. Box 372, 219 US Hwy 206, Andover, NJ 07821, U.S.A. They can be contacted via phone at 1-800-247-8887 or 1-973-786-6386, fax at 1-973-786-7586, or email at [email protected]. More information is available on their website at www.kanomax-usa.com.

Catalog excerpts

<j KANOMAX ------ The Ultimate Measurements DiNOt Tracer Gas Hardwaref Professional Fume Hood Diagnostic Tools The ANSI/ASHRAE 110 test is a method of testing the performance of laboratory fume hoods. The Kanomax Dif-Kit is ideal for use in performing the Tracer Gas test in accordance with the ANSI/ASHRAE Standard 110-1995. Kanomax also offers alternative tracer gas systems due to concerns to prevent greenhouse gas emissions. Features & Benefits • Diffuser is made to the design and specifications of Standard drawing #110-83M • The internal critical orifice ensures a flow rate of 4 liters per minute. Other orifice sizes can be inserted • Alternative tracer gas systems are available - SF6, NO2, or FM-200 (HFC-227) • Thermal anemometer for face velocity testing • Commercial fog machine for flow visualization The Vapor Analyzer is factory calibrated for the tracer gases. Response time is less than 10 seconds to 90% response with a stable maximum concentration in less than 30 seconds.

Open the catalog to page 1

Vapor Analyzer Specifications

Open the catalog to page 2

Dif-Kit

Dif-Kit

Catalog excerpts

All Kanomax USA catalogs and technical brochures