Catalogs >
Kanetec >
WATER-COOLING RECTANGULAR TYPE

WATER-COOLING RECTANGULAR TYPE
1Pages

Catalog excerpts

^ELECTROMAGNETIC CHUCKS WATER-COOLING RECTANGULAR TYPE Side rail Hose joint Chuck controller required additionally Suitable for high precision grinding during which no heat must be generated when the •A special construction to cool the electro- magnetic coil directly. •A unique construction; accuracy change is very small and temperature rise is minimized by using both cooling water flowing inside the chuck and grinding fluid sprayed to the top surface. This design minimizes thermal expansion of the chuck •Cooling water flows through the internal coils in the chuck, a proven Kanetec original •Most suitable for dry grinding operations as heat of workpieces is also removed. Height Hole Chuck Master ^Full-function chuck masters are available with both rectification and demagnetization functions. ^If the magnetic force needs not be adjusted, use ES- ^The chuck controller and clamp parts are not included. The KANETEC chucks work best when a KANETEC chuck controller is used. ^Only the side M. ^A cooler unit is required additionally. Not supplied by KANETEC stopper is included. (The back stopper is not included.) Model KCT-U WATER-COOLING ROTARY TYPE Chuck controller required additionally Since no heat is generated when the power is on, this model is suitable for high precision angle grinding. •Cooling water flows through the internal coils in the chuck, a proven Kanetec original design. •Since the cooling hose is connected to the shaft, a desired tilting range can be set. •The hose does not become an obstacle regardless of tilting angles of the work face. Grinding at a tilted angle can be carried out without paying attention to •Cooling water is let flow inside the chuck to cool the coil directly and grinding fluid cools the top surface. This design minimizes temperature rise, thus minimizing accuracy change of the chuck. Rotary Base Chuck Master ^Full-function chuck masters are available with both rectification and demagnetization functions. ^If the magnetic force needs not be adjusted, use ES-M. cooler unit is required additionally. r^The chuck controller and clamp parts are not included. The KANETEC chucks work best when a KANETEC chuck controller

Open the catalog to page 1