*mydirectindustry

Catalogs
Kanetec
SBE-U / SBC-U / SBEP-U Model SBC-U

SBE-U / SBC-U / SBEP-U Model SBC-U

Product catalog summary

Overview
This document provides technical specifications and features of various models of electromagnetic and permanent magnetic chucks, specifically focusing on the SBC-U and SBEP-U rotary type sine bar chucks. These chucks are designed for high precision grinding applications, particularly in angle grinding of molds and jigs.

Specifications

Model SBC-U: Features water-cooling to manage heat generated during power application, suitable for high precision grinding. Requires a chuck controller and additional cooler unit.
Model SBEP-U: Utilizes permanent electromagnetism, requiring momentary power application, thus minimizing heat generation and energy consumption. Maintains holding power during power failures for enhanced safety.

Features

Both models have similar mechanical functions to Model SBE chucks.
Water flow for cooling is between 2 to 4 L/min for SBC-U.
SBEP-U saves energy by not requiring continuous power to maintain holding power.

Technical Data

Nominal dimensions for both models are 110 mm x 315 mm.
Tilting angle ranges from -15° to +45° with an angle accuracy of 0.007/100 max.
Voltage and current specifications differ between models, with SBC-U at 90 VDC, 0.3A and SBEP-U at DC90V, 2.1A.
Mass for both models is approximately 36 kg (79 lb).

Additional Information

Models include a block gauge for 0° angle setting and a conversion table for angle adjustments.
Chuck controllers and clamp parts are not included and are recommended to be used with KANETEC controllers for optimal performance.

Catalog excerpts

SBE-U / SBC-U / SBEP-U ROTARY TYPE WATER-COOLING ELECTROMAGNETIC SINE BAR CHUCK Chuck controller required additionally Constructed to enable real-time internal cooling of heat generated when power is applied to the electromagnet, making these models suitable for higher precision grinding requirements. •Change in precision is minimized by feeding the coolant inside chuck to cool the coil and prevent temperature rise. Water flow 2 to 4 L/min. •The mechanical functions and features are almost the same as those of r^The model having a gauge block setting area on the right side is indicated by"R"and that on the left side indicated by "L" r^The chuck controller and clamp parts are not included. The KANETEC chucks work best when a KANETEC chuck controller is used %.A block gauge (25.882 mm) for 0° is included. For the mechanism of angle setting, see the bottom part of page 47. The conversion table included with the product facilitates ang

Open the catalog to page 1

All Kanetec catalogs and technical brochures