^PERMANENT ELECTROMAGNETIC CHUCKS 3 PERMANENT ELECTROMAGNETIC CHUCK FOR MILLING A Line-up of Products Selectable According to Machining Methods and Workpieces. ■Revised design reduces electric power consumption providing a more compact size chuck master. ■The detachable power connector type is provided to respond to pallet changing. Suitable for securing workpieces during cutting on milling machines and machining centers. •Can be used in wet machining operations. •The chuck is very thin, 70 mm in height, and light weight. •Less accuracy change and highly robust construction. •Achieve significant power savings compared to conventional products. •Magnetization and demagnetization in a very short time. Happed holes on the attractive face can be used to install various blocks to hold workpieces by various methods according to machining operations. •Straightening blocks are also available that are mounted on the chuck work face to hold workpieces by an induction field. These optional products are very useful for such workpieces of irregular attractive faces that for example have steps and distortion and for machining the bottom and side faces of workpieces. Donnector cable Chuck controller required additionally jjTurning the permanent electromagnetic chucks on and off must be limited to once per several minutes. If on/off operations are repeated frequently, the chucks may

IModel designation Chuck size (When ordering) •Sizes other than the standard sizes listed in the left-side table are also •The maximum one-piece size is W1300 x L1500 mm. For larger sizes, •When workpieces are hardened steels or special steels, they may be difficult to dismount due to strong residual magnetism. •In these cases it is recommended EP-D type (P.33). ijH-sizes are standard hight