Catalogs >
Kanetec >
MPV-MF / MPV-CL / MPV-F / MPV / NH / MDR / MP

MPV-MF / MPV-CL / MPV-F / MPV / NH / MDR / MP
1Pages

Catalog excerpts

MPV-MF / MPV-CL / MPV-F / MPV / NH / MDR / MP - 1

MPV-MF / MPV-CL / MPV-F / MPV / NH / MDR / MP MAGNETIC TYPE NOZZLE HOLDER Bendable freely ! This holder is designed for holding a nozzle(s) at the end of cutting oil hose on machine tools. This can also be used to remove by injecting cutting liquid chips and particles produced during electric •Compared with conventional product, flexibility is extremely Flexible part can be universally bent ( NH-M1 ,M3) •By adopting metal made flexible part, stable holding position is maintained even when providing high pressure air or a large In addition, it is strong against damage by heat caused by cut particle when milling. Its durability is improved ( NH-M1 ,M3). •Strong holding power enables the holder to be installed at any •A flexible hose enables the nozzle tip to be positioned at any •The employment of a cock allows flowrate adjustment. •The adjustable hose can be adjusted in length by removing or adding joints. [mm(in)] The Magpad is a device to prevent wire breakage by heat due to aerial discharge. It protects wire electrodes of wire electric discharge machines from separation of cooling liquid which is likely to occur at This Magpad can also be used to prevent dislocation or dropping of cut workpieces at the start or end of cutting. •The Magpad is made of transparent acrylic plate incorporating powerful magnets. Having a strong holding power, it enables setting wire while monitoring its position. •No mechanical clamp is required. Attaching and detaching can be done efficiently and without a fear of damaging workpieces. •Various models are availables to suit any workpiece configuration. •There is no possibility of rusting and the magnetic force is semi- permanent. The Magpad withstands repeated use and thereforce is very economical. SThe holding power applies to SS400, thickness 20 mm and ground surface

Open the catalog to page 1