*mydirectindustry

Catalogs
Kanetec
Model LPH-L LIFTING MAGNET

Model LPH-L LIFTING MAGNET

Product catalog summary

Overview: This document provides technical specifications and usage guidelines for various magnetic lifting equipment, including lifting magnets, magnetic separators, and tools for welding operations. It focuses on the LPH-L model and the HL Hand Lifma series.

Specifications:

LPH-L Model: Designed for lifting section steel with adapters for mountain and valley-shaped steel forms. The LPH-L600-M and LPH-L600-V models have specific dimensions and mass, with the ability to lift steel forms of certain sizes.
HL Hand Lifma: Includes models HL-15 and HL-20A, suitable for pulling out and carrying steel materials. They feature a cam mechanism for smooth operation and a lever for magnetic force control.

Procedures:

LPH-L Usage: The LPH-L model can be used with or without adapters, depending on the steel form shape. Adapters are available for special orders.
HL Hand Lifma Usage: To hold, place the device on the object and ensure proper attraction. To release, turn the handle in the off direction.

Recommendations:

Use the lifting equipment at a load that is one-third or less of the indicated capacity for safety.
Avoid using the HL Hand Lifma as a hoist.

Key Data:

LPH-L600-M: For mountain-shaped steel, dimensions are 250mm x 150mm x 40mm, mass 40kg.
HL-15: Holding power of 350N, lifting capacity of 1.5kN, mass 3.0kg.
HL-20A: Holding power of 500N, lifting capacity of 2kN, mass 2.5kg.

Catalog excerpts

<^LIFTING MAGNET Model LPH-L SECTION STEEL LIFTING PERMANENT MAGNETIC LIFMA* Adaper for mountain shaped steel form L shape steel can be easily transported with the dedicated adapter equipped on the standard type permanent magnetic Lifma LPH. •Without adapter, it can be used as standard LPH type. •Another adapter for other shaped steel forms can be equipped with special order mounting. (An example of lifting by use of LPH-L typej Lift capacity of flat steel plate or round steel bar is reduced when adapters are mounted of LPH-. Lift capacity is lower, due to magnetic leakage into the adapters. ^The holding power applies to 15mm thick soft steel. The holding power drops according to thicknesses and materials of workpieces. For safety, please use these products at a load that is one third or less of the values indicated in the table.

Open the catalog to page 1

All Kanetec catalogs and technical brochures