*mydirectindustry

Catalogs
Kanetec
Model KET-UTS

Model KET-UTS

Product catalog summary

Overview: The document provides technical specifications and usage guidelines for various models of permanent magnetic chucks, permanent electromagnetic chucks, and related accessories. It focuses on the KET-UTS series, particularly the KET-UTFS model, which is designed for use with grinders and wood slice cutters.

Specifications: The KET-UTFS model is suitable for angle grinding and uniform longitudinal grinding. It includes components such as a main unit, lead shaft, intermediate shaft, tilting shaft, tilting base, and intermediate tilting base. The document lists several models with varying dimensions, voltage, current, and mass, such as KET-20100UTFS, KET-20120UTFS, and others, with specific measurements and electrical requirements.

Procedures: For connecting multiple units, the document advises using the formula 'current x number of units connected' to select an appropriate model. It also notes that the chuck controller and clamp parts are not included and recommends using a KANETEC chuck controller for optimal performance.

Features: The KET-UTFS model is a connecting type with a large tilting torque, designed to increase the reduction ratio on the machine side. The chuck-to-chuck connecting clearance is minimal at 40 mm. The document provides guidance on ordering additional units for connection.

Recommendations: If magnetic force adjustment is not required, the ES-M model is suggested. For models with a combination of a rectifier and demagnetizer, additional information is available in the 'Chuck Controllers' section.

Figures and Diagrams: The document includes diagrams illustrating the connection of multiple units and the components involved, such as worm wheels, indicating plates, and scaled rings.

Catalog excerpts

KET-U/ KEZ-H / KETV/ KET-UTS Model KET-UTS LARGE CONNECTING ROTARY TYPE Chuck controller required additionally Intermediate tilting base Tilting shaft Key width 8 X depth 5 (The above figure shows 3 standard units connected.) ^The chuck controllers in this table are for single unit and when two or more units are connected, use "current x number of units connected" to select a suitable model. '{'M the magnetic force needs not be adjusted, use ES-M. r^The chuck controller and clamp parts are not included. The KANETEC chucks work best when a KANETEC chuck controller is used. ^The above models include the main unit, right/left tilting bases, lead shaft and tilting shaft.

Open the catalog to page 1

All Kanetec catalogs and technical brochures