^ELECTROMAGNETIC CHUCKS HORIZONTAL PITCH TYPE These are versatile electromagnetic chucks, with longitudinal direction poles; capable of holding workpieces, thin and thick, used in grinding and light duty cutting. In particular, these chucks are suited for long workpieces, and used in additional applications such as buff and belt grinding of large quantities of workpieces, which are difficult to hold on standard type electro-magnetic chucks. •Close pole pattern, in longitudinal direction. •The N-S magnetic force lines are spaced relatively wide for good holding via a belt. (Note, however, that because the distribution of the holding power is not uniform, they may not be suitable for grinding small workpieces arranged over the whole surface.) •Powerful holding, with low profile height. Power cord Chuck controller required SFull-function chuck masters are available with both rectification and demagnetization functions. ^If the magnetic force needs not be adjusted, use ES-M. i^The chuck controller and clamp parts are not included. The KANETEC chucks work best when a KANETEC chuck controller is used. ^ Only the side stopper is included. (The back stopper is not included