MEASURING TOOL HOLDERS
12Pages

A metallic lever employed! Completely new design to renew magnetic bases! MAGNETIC BASE New magnetic bases ideal for precision measurement! ^Upper fixture, Model DG-6 (attaching hole of 04.5/6.4) , for attaching dial guage is optionally supplied. ^The holding power applies to SS400, thickness 10 mm and ground surface.

MAGNETIC BASE (Names of major components of MB-B) ( Parts for sale ) to fix DG lug Indicator clamping screw fixing screw Upper fixture Lower fixture switching part Please refer to P65, P67 for the common models. However, please take note that there may be difference in screw hole for mounting main pole and so on. Branch pole Main pole Clipper and Lower clamping fixtures as well as switching part are to be sold in one lot. Rear Face ( (^MB-PSL excluded) Upper Fixture (Fixture for Mounting Dial Gauge) •Upper fixture clamp with mounting hole size of F2, K (if 04.5mm mounting hole is required)....

{^MEASURING TOOL HOLDERS Model MB-MX HIGH LOCK BASE Mechanical lock & fine movement adjuster Tightening torque + clamp force + fine adjustment function, all improved! Dial gauge is optional Free style by dial adjustment accurate measurement While these bases are used as measuring tool holders, like magnetic bases, they can also be used to hold sensors in place. •Any position can be set by tightening a knob to lock every part. •The clamp system is adjustable steplessly. Light turn achieves it. Quick lock mechanism. : The holding power applies to SS400, thickness 10 mm and ground

MB-MX / MB-X / MB-OX / GB-MX Optional upper fixture for sale! (See page 58) VACUUM CHUCKS PERMANENT PERMANENT CHUCK ELECTROMAGNETIC ELECTROMAGNETIC CHUCKS MAGNETIC CHUCKS CONTROLLERS CHUCKS Model MB-OX PROMELTA SYSTEM Model GB-MX MAGNETIC HOLDERS MEASURING TOOL HOLDERS MAGNETIC TOOLS WORKING TOOLS MAGNETIC BLOCKS Free style by dial adjustment

{^MEASURING TOOL HOLDERS Model MB-BRB BORER BASE" Useful for measuring the projected amount of a cutter mounted on the arbor of a boring machine with a dial gauge to locate the cutter precisely. •Attractive face ( V face ) is annealed and is excellent in wear resistance, difficult scratch. Durability is excellent. •Perpendicularity between the face for fixing metal, for installing dial gauge, and V face is within 5 micro meter. •The fixture for dial gauge corresponding to dia. 8 stem, is included, as a standard accessory, •Dial gauge mounting bracket.adjusts to 2 height. Conventional method...

MB-BRB / MB-S / ME-LED / ME-BL / ME Model ME-LED MAGNETIC LED LIGHT STAND Our original LED stand, light weight with modern style! For field & shop processing work on machine tables, as well as a table lamp on a steel desk! •High intensity 5 light or 10 light models use only 5W/ 10 W for power savings. •LED one piece lighting unit is light weight and compact. •Thin lighting of 21.5mm only is adopted for all models. As setting space is not taken, it is suitable to be used in a narrow place. •With strong magnetic attractive force, it can be easily installed not only on horizontal place but...

{^MEASURING TOOL HOLDERS i!W?EJZT3 MAGNETIC LAMP STAND flexible tube. Shade temperature rise protected from dust. Comparison of illuminance with and without special (Dedicated fluorescent lamp J The magnetic lamp stands allow the magnet to be turned on and off quickly, and thus can easily be installed in any place, removed and relocated. These stands are most suitable for illumination of work areas on workbenches or machine tools. Thanks to a strong holding power by a small and light weight, yet strong magnet, these stands can easily be mounted not only on a horizontal face, but inclined...

rSWhen using a stand with 100W incandescent lamp for long hours, no rating problem arises, but caution against overheating when handling it. ^Depending on the dimensions of bulb type fluorescent lamp, they may be used on ME-2CA. rSThe holding power applies to SS400, plate thickness 10 mm and ground surface. •A lamp must be of the correct rating. The use of a lamp exceeding the rating will cause injury or accident due to heat. •For replacement lamps, please use Kanetec recommended lamps for safe operation. Please contact your nearest dealer or Kanetec sales office.

A metallic lever employed! Completely new design to renew magnetic bases! MAGNETIC HOLDER BASE Slf a plate is to be installed on the top face (tapped holes provided), be sure to use a nonmagnetic material (e.g. aluminum, SUS304, brass plate). If a magnetic material such as iron is mounted/installed to the top face, the holding power will drop significantly. Available in a wide range of sizes from minimum and medium to large. These on-off switchable magnetic holder bases meet various application Usable as a tacking base for equipment, and/or a measuring base for laser use (by installing jigs...

MAGNETIC HOLDER BASE This base can be used widely as a magnetic force ON/OFF type magnetic base. It is designed small and is useful as a base for temporarily mounted legs of equipment, sensors and lasers by mounting a jig using tapped holes or by some additional machining. •The base can be mounted and demounted easily using the select lever. •Compact but powerful magnetic force. •Waterproof and oilproof construction. [mm(in)] : The holding power applies to SS400, thickness 10 mm and ground

{^MEASURING TOOL HOLDERS Information for additional working on magnetic holder bases 1)The (shaded) areas shown in the following figures can 3) Additional working may result in a drop in the holding power and strength. Prior to using the base after additional working, always check its capacity. 2) If areas (magnet, separator, main unit construction) other than 4) If a plate is to be installed on the top face (tapped holes provided), be sure the (shaded) areas have been worked, the ON-OFF to use a nonmagnetic material (e.g. aluminum, SUS304, brass plate). If a magnetic material such as iron...

MAGNETIC LENS STAND MAGLENS* Very useful for accurate readings of the smallest graduations on measuring instruments. •The large diameter lens protects your eyes from fatigue and is easy to read. •Angle of Maglens is freely adjustable with its flexible neck; and the lens is alse turnable. : The holding power applies to SS400, thickness 25 mm and ground surface