KMDT / KMDTR / KMDTC / KMDP / KMDH / KMDC
1Pages

{{requestButtons}}

Catalog excerpts

KMDT / KMDTR / KMDTC / KMDP / KMDH / KMDC - 1

KtADT / KtADTR / KtADTC / KtADP / KtADH / KtADC Model KMDP Recommended where magnetism on the surface of metallic workpieces in general need to be reduced in a limited area or locally. This is useful to completely eliminate weak magnetism that remains locally in jigs and workpieces after they have been demagnetized by a large demagnetizer. It is also suitable for demagnetizing cutters of machines and punches and guide pins of press dies while they are mounted. •A rare earth magnet having strong magnetic force is used at the end of the rotary magnetic field. •Re-chargeable battery operation. Power can also be supplied by the •Handy, maintenance free design with compact style and long life use. •Environment friendly nickel hydrogen rechargeable battery included. ►The demagnetizer is turned on while the pushbutton switch is held pressed and turned off when ►The button must be pressed on during demagnetizing operation. ►Turn it off when the demagnetizer is more than 100 mm away from ►Working rate: 70% ED (power on r^The height is up to the grip. ^2m cord is provided. ^A different-voltage type (special type) is also available Model KMDC TOOL DEMAGNETIZER For demagnetization of magnetized tools such as drills, reamers and cutters and measuring equipment! Easy demagnetization of a wide variety of magnetized objects including tools such as drills, milling cutters, reamers and cutters, round workpieces and measuring equipment. •Small and light weight for easy operation. •Capable of removing small chips attracted by magnetism on drills and reamers while such tools are being mounted on machines. •Power is applied only while the pushbutton is held for demagnetization. •Turn off (release the push-button) the demagnetizer after moving it away more than 100 mm from an object demagnetized. •If the demagnetizer is turned on frequently, the body temperature rises. If the temperature rises too high, it is indicated by an overheat alarm seal. Stop using it for a while Power Source Momentary power on bypushbutton i^Cord length 2.5 m (curled cord) included.

Open the catalog to page 1

All Kanetec catalogs and technical brochures

  1. Model EP-QZ

    1 Pages

  2. Model KCC-AR

    1 Pages

  3. KET-U

    1 Pages

  4. Model KET

    1 Pages

  5. Model KESL

    1 Pages

  6. LIFTING MAGNET

    14 Pages

  7. MAGBORE

    2 Pages

Archived catalogs