BLOCKS, HOLDERS, MINI CHUCKS
7Pages

{{requestButtons}}

Catalog excerpts

BLOCKS, HOLDERS, MINI CHUCKS - 1

one-face holding rectangular permanent magnetic mini chuck [Application] These chucks are used in combination with a magnetic chuck as an auxiliary holding tool for irregularly shaped workpieces in grinding and light duty cutting. These chucks are of drip-proof construction enabling them to hold workpieces in electric discharge machining fluid. [Features] •The magnetic force can be turned ON and OFF from indicates the either the front side or the rear side. attractive face. •The chucks can be used in fluid. [mm (in)] +The holding power is based on a test piece of ^50 x t25, S15C. one-face holding round permanent magnetic mini chuck indicates the attractive face. [Application] These chucks are used in combination with a magnetic chuck as an auxiliary holding tool for irregularly shaped workpieces in grinding and light duty cutting. (These chucks cannot be used in wet operations.) They can also be used for such applications as holding workpieces in advance to reduce the setup time. Thus they can be used for continuous grinding of small and thin workpieces. [Features] •These chucks are of powerful type having a special construction using Alnico magnet steel. •Small, but the magnetic force can be turned on and off. [mm (in)] +The holding power is based on a test piece of ^50 x t25, S15C. three-face holding permanent magnetic mini chuck O- CO Vindicate the attractive face. [Application] These chucks have three attractive faces and can be used in combination with a magnetic chuck. They are suitable for setting angles of small workpieces and angle grinding. [Features] •Since these chucks have three attractive faces, one face may be used for mounting the chuck and other faces for holding workpieces. •They have magnetic poles arranged at micro pitches to hold small workpieces. •Drip-proof construction. [ (il] + The holding power is based on a test piece of ^50 x t25, S15C, ground surface, with nothing held on other faces. + Note that when workpieces are held on two or more faces simultaneously, the holding power of each face drops. Model MMXW four-face holding permanent magnetic mini chuck mmxw-6iia -# indicate the attractive face. + The holding power is based on a test piece of ^50 x t25, S15C, ground surface, with nothing held on other faces. + Note that when workpieces are held on two or more faces simultaneously, the holding power of each face drops. [Application] These chucks are suitable for holding workpieces in such operations as grinding, boring, cutting, welding and assembly. Since four faces can hold workpieces simultaneously, they can be used as a magnet vice in a wide range of applications. [Features] •These are unique universal mini chucks capable of holding workpieces on four faces. •They can be used in such a way as to hold workpieces on the bed of a machine tool or holding workpieces on the top and side faces simultaneously. They can also be used as a guide stopper to secure workpieces. •The accuracy is as follows: flatness 0.01 mm, parallelism 0.02 mm, squareness 0.03 mm.

Open the catalog to page 1
BLOCKS, HOLDERS, MINI CHUCKS - 2

Model RMAW-2F TWO-FACE HOLDING BLOCK FOR SMALL WORKPIECE ELECTROMAGNETIC CHUCK PERMANENT PERMANENT j BLOCKS j VACUUM | PROMELTA* | SINE BAR IBMMOlLDEiM HOLDING MEASURING j MAGNETIC | MAGNETIC CHUCKS CONTROLLERS i MAGNETIC CHUCKS! ELECTROMAGNETIC CHUCKS FOR MC ! CHUCKS ! SYSTEM ! CHUCKS HII!IC1C!« TOOLS TOOL HOLDERS HOLDERS ! TOOLS Most powerful 2-face holding block! [Application] Suitable for holding workpieces in various operations such as grinding and light duty cutting, measurement and assembly work. [Features] •The strongest holding power among small permanent magnetic...

Open the catalog to page 2
BLOCKS, HOLDERS, MINI CHUCKS - 3

RMAW-2F / KPB / KM-JB / MM Suitable as exclusive fixing jig for round steel bars and irregularly shaped workpieces! [Application] In addition to using these holders as a fixing jig for small workpieces, they can be used as a block to support 3 points of a workpiece during grinding. [Features] ●Each face can be worked additionally for up to 10mm. (The on/off operation face and rear face are excluded.) ●By using these holders as exclusive jigs for a particular workpiece, the work efficiency is improved. ●As these holders are of drip-proof construction, they can be used in liquid such as during...

Open the catalog to page 3
BLOCKS, HOLDERS, MINI CHUCKS - 4

SQUARE TYPE BLOCK ELECTROMAGNETIC CHUCK PERMANENT PERMANENT j BLOCKS j VACUUM | PROMELTA* | SINE BAR IBUMOHDEiM HOLDING MEASURING j MAGNETIC | MAGNETICCHUCKS CONTROLLERS i MAGNETIC CHUCKS! ELECTROMAGNETIC CHUCKS FOR MC ! CHUCKS ! SYSTEM ! CHUCKS BUCICIM TOOLS TOOL HOLDERS HOLDERS ! TOOLS Vindicates the attractive face. [Application] Holding tools for marking and light duty machining. Holding tools for three-dimensional measuring instruments and various measuring systems. [Features] •Workpieces can be held on three faces of the top (V face) and both side faces. •The ON/OFF lever...

Open the catalog to page 4
BLOCKS, HOLDERS, MINI CHUCKS - 5

MAGNETIC V-HOLDER [Application] Holding tools for round bar marking, drilling, tapping and grinding of irregularly shaped workpieces. Holding tools for three-dimensional measuring instruments and various measuring systems. [Features] •Workpieces can be held on the top face (V face), bottom face and rear face. •The ON/OFF lever is detachable. (The length of the opposite sides of the hex hole is 8 mm.) •Drip-proof and oil-resistant construction. •Ultra-precision finishing is also available. Please contact us. Applicable Diameter ■The dimensional accuracy of KVA and KVA-2F is based on KANETEC...

Open the catalog to page 5
BLOCKS, HOLDERS, MINI CHUCKS - 6

Model KVS MAGNETIC V-HOLDER ELECTROMAGNETIC CHUCK PERMANENT PERMANENT j BLOCKS j VACUUM | PROMELTA* | SINE BAR IBUMOHDEiM HOLDING MEASURING j MAGNETIC | MAGNETICCHUCKS CONTROLLERS i MAGNETIC CHUCKS! ELECTROMAGNETIC CHUCKS FOR MC ! CHUCKS ! SYSTEM ! CHUCKS HII!IC1C!« TOOLS TOOL HOLDERS HOLDERS ! TOOLS KVS-1B [Application] Suitable for securing irregularly shaped workpieces for grinding and light duty cutting such as drilling and tapping. [Features] •The special construction exerts a strong magnetic force on three faces of top, bottom and end. •Usable for inspection also. Two...

Open the catalog to page 6

All Kanetec catalogs and technical brochures

  1. Model EP-QZ

    1 Pages

  2. Model KCC-AR

    1 Pages

  3. KET-U

    1 Pages

  4. Model KET

    1 Pages

  5. Model KESL

    1 Pages

  6. LIFTING MAGNET

    14 Pages

  7. MAGBORE

    2 Pages

Archived catalogs