ENSHIN Planer Head Body for More User Value PowerLock and Bore-Type http:// www.kanefusa.net CENTRIFUGAL FORCE Unique and easy to handle centrifugal self-locking system accurately locks the knives in place. Turn over knife with chip breaker Wedge Gib Spring Direction of Rotation KANEFUSA CORPORATION Head Office / Factory 1-1 Nakaoguchi, Ohguchi-cho, Niwa-Gun Aichi-ken, Japan, Postal Code 480-0192 Te l :+81 587 95 7221 Fax :+81 587 95 7226 E-mail:[email protected] Run out less than 0.04 mm. Surface finish is superior especially when used in conjunction with PowerLock-System. PowerLock ENSHIN is a mono-block tooling in steel for highest rigidity, excellent runout, longest use life and tested for RPM of up to 12500min-1. Bore-type ENSHIN is made of Aluminum for light weight, but with high durability and longest use life. P.T. KANEFUSA INDONESIA EJIP Industrial Park, Plot 8D, Cikarang Selatan, Bekasi 17550, West Java, Indonesia Tel : +62 21 897 0360 Fax: +62 21 897 0286 +62 21 897 0287 E-mail : [email protected] Closed round shaped body ensures a quiet work environment. KANEFUSA EUROPE B.V. Europe Office De Witbogt 12, 5652 AG, Eindhoven, The Netherlands Tel : +31 40 2900901 Fax :+31 40 2900908 E-mail : [email protected] German Office Turn the safety stopper ring Tap the wedge gently Radlerstrasse 78, 87600 Kaufbeuren, Germany Tel : +49 8341 95 59 659 Fax: +49 8341 95 59 661 E-mail : [email protected] Slide out the knife Application KANEFUSA USA, INC. N (rpm) Z S.R (mm) 1 2 6000 4 5 10 F (m/min) 15 20 N (rpm) 25 30 Ultra fine planing Z S.R (mm) 1 35 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 8000 12000 Fine planing 2 2 5 10 F (m/min) 15 20 25 30 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 KANEFUSA CHINA CORPORATION KUNSHAN KANEFUSA CORPORATION NO.50 Zhuzhu Road, Lujia Town Kunshan city, Jiangsu, China Tel : +86 512 57875072 Fax: +86 512 57875073 E-mail : [email protected] MALAYSIA OFFICE Rough planing Knife Grade Material Regrinding HS-HP Softwoods Can not be reground HW Hardwood, Tropical wood 35 2762 Circleport Drive, Erlanger, KY 41018, USA Tel : +1 859 283 1450 Fax: +1 859 283 5256 E-mail : [email protected] 0.7 mm at the back side (grinding fixture available) Suite 839 Level 8, Pavilion KL 168 Jalan Bukit Bintang 55100 Kuala Lumpur, Malaysia Tel : +60 3 92057721 Fax: +60 3 92057720 E-mail : [email protected] Kanefusa - A New Dimension of Performance Due to the knife features, all heads are suitable to cut hardwoods as well as softwoods. Different hook angles for different materials are not required. 09 Trademark of American Soybean Association 3 1,000 Specifications and appearance are subject to change without notice. Photographs and illustrations may vary from actual products. 0-27-7

Technology Sizes An uncoated edge wears out quickly. The blunt cutting edge tears out the grain and does not give a satisfactory cut finish. Bore Type Heads Knives Code No. Size Grade 1 The pictures above show the pores of oak after a cutting path of 100m. The HSS cutting edge is already a little blunt and instead of cutting the pores cleanly, it compresses the fibers. HSS cutting edge after cutting 1000m of Spruce 3 789-B078-500 125 x 150 x 40 x 4 8000 4 789-A868-500 125 x 180 x 40 x 4 5 789-A866-500 125 x 230 x 40 x 4 8000 6 789-B630-500 125 x 100 x 1 1/2" x 4 8000 7 789-B638-500 125 x 130...

Technology Sizes An uncoated edge wears out quickly. The blunt cutting edge tears out the grain and does not give a satisfactory cut finish. Bore Type Heads Knives Code No. Size Grade 1 The pictures above show the pores of oak after a cutting path of 100m. The HSS cutting edge is already a little blunt and instead of cutting the pores cleanly, it compresses the fibers. HSS cutting edge after cutting 1000m of Spruce 3 789-B078-500 125 x 150 x 40 x 4 8000 4 789-A868-500 125 x 180 x 40 x 4 5 789-A866-500 125 x 230 x 40 x 4 8000 6 789-B630-500 125 x 100 x 1 1/2" x 4 8000 7 789-B638-500 125 x 130...

Technology Sizes An uncoated edge wears out quickly. The blunt cutting edge tears out the grain and does not give a satisfactory cut finish. Bore Type Heads Knives Code No. Size Grade 1 The pictures above show the pores of oak after a cutting path of 100m. The HSS cutting edge is already a little blunt and instead of cutting the pores cleanly, it compresses the fibers. HSS cutting edge after cutting 1000m of Spruce 3 789-B078-500 125 x 150 x 40 x 4 8000 4 789-A868-500 125 x 180 x 40 x 4 5 789-A866-500 125 x 230 x 40 x 4 8000 6 789-B630-500 125 x 100 x 1 1/2" x 4 8000 7 789-B638-500 125 x 130...

ENSHIN Planer Head Body for More User Value PowerLock and Bore-Type http:// www.kanefusa.net CENTRIFUGAL FORCE Unique and easy to handle centrifugal self-locking system accurately locks the knives in place. Turn over knife with chip breaker Wedge Gib Spring Direction of Rotation KANEFUSA CORPORATION Head Office / Factory 1-1 Nakaoguchi, Ohguchi-cho, Niwa-Gun Aichi-ken, Japan, Postal Code 480-0192 Te l :+81 587 95 7221 Fax :+81 587 95 7226 E-mail:[email protected] Run out less than 0.04 mm. Surface finish is superior especially when used in conjunction with PowerLock-System. PowerLock ENSHIN...

ENSHIN Planer Head Body for More User Value PowerLock and Bore-Type http:// www.kanefusa.net CENTRIFUGAL FORCE Unique and easy to handle centrifugal self-locking system accurately locks the knives in place. Turn over knife with chip breaker Wedge Gib Spring Direction of Rotation KANEFUSA CORPORATION Head Office / Factory 1-1 Nakaoguchi, Ohguchi-cho, Niwa-Gun Aichi-ken, Japan, Postal Code 480-0192 Te l :+81 587 95 7221 Fax :+81 587 95 7226 E-mail:[email protected] Run out less than 0.04 mm. Surface finish is superior especially when used in conjunction with PowerLock-System. PowerLock ENSHIN...