*mydirectindustry

Catalogs
Kane International
The INF200 Infra-red thermometer

The INF200 Infra-red thermometer

Product catalog summary

Overview: The INF200 is a non-contact infrared thermometer designed for quick and easy diagnostic temperature measurements. It is suitable for monitoring various surfaces such as transformers, circuit breaker panels, motors, bearings, and more, helping to save time and reduce the risk of burns and injuries.

Key Features:

Laser targeting for precise measurement.
Memory for nine measurements with five functions each.
Measures minimum, maximum, delta T, and average temperatures.
Switchable temperature readings in Fahrenheit or Celsius.
Temperature range from 0˚ to 788˚F (-20˚ to 420˚C).
Distance spot ratio of 8 to 1.
Adjustable emissivity from 0.30 to 1.0.
Built-in barrel sight and backlight for ease of use.
User-programmable alarm and simple operation.
Comes with a protective high-impact case and a one-year limited warranty.

Specifications:

Accuracy: ±2% of reading or ±3˚F (±2˚C), whichever is greater.
Repeatability: ±1% of reading or ±2˚F (1˚C), whichever is greater.
Response time: 500 milliseconds (95% response).
Spectral response: 7 - 18 microns nominal thermopile detector.
Temperature display: Selectable in ˚F or ˚C with a 3-digit LCD.
Display resolution: 1˚F or 1˚C in all modes.
Ambient operating range: 32˚ to 120˚F (0˚ to 50˚C).
Relative humidity: 10 - 95% RH non-condensing up to 85˚F (30˚C).
Storage temperature: -13˚ to 158˚F (-25˚ to 70˚C) without battery.
Power: 9V alkaline battery with a life of 50 hours without backlight, 16 hours with 50% laser and backlight use.
Dimensions: 5.4” x 1.6” x 7.7” (137 mm x 41 mm x 196 mm).
Weight: 9.5 oz. (270 gm).
Accessories: Manual and water-resistant hard case.

Additional Information: The laser is offset 0.5” (1-2 cm) below the center of the target spot. Battery life varies based on backlight and laser use. The product is distributed by UEi with contact information provided for the USA, Canada, and Europe.

Catalog excerpts

INF200 Infrared Thermometer FASTER, EASIER WAY TO TAKE DIAGNOSTIC TEMPERATURE MEASUREMENTS Laser targeting Nine measurement memory Measures MIN/MAX/∆T/AVG temperatures Switchable ˚F or ˚C readings Temperature 0˚ to +788˚F (-20˚ to +420˚C) Distance spot ratio of 8 to 1 Emissivity: adjustable 0.30 to 1.0 Backlight

Open the catalog to page 1

INF200 • Infrared Thermometer The INF200 non-contact infrared thermometer provides a faster, easier way to take diagnostic temperature measurements. Monitor the temperature of transformers, circuit breaker panels, motors and bearings, supply and return registers, ducts, inlet/outlet steam lines, furnace flues and many other surfaces. use the INF200 when diagnosing temperature problems to save time and reduce the risk of burns and injuries. The INF200 has the following features: • Laser targeting • Nine measurement memory • Measures MIN/MAX/∆T/AVG temperatures • Switchable ˚F or ˚C readings •...

Open the catalog to page 2

The INF200 Infra-red thermometer

The INF200 Infra-red thermometer

Catalog excerpts

All Kane International catalogs and technical brochures