Hand Held Multi-Gas Emissions Analyser KANE940 High suction double headed pump Teon lined ue probe Infra-red printer link... printed header can be customised Memory to store 150 test results for easy transfer to PC Long life battery recharged in situ Carbon Monoxide (CO) to 10,000ppm with hydrogen compensated sensor (alternatively CO to 100,000ppm with high range sensor) Nitric Oxide (NO) to 5000ppm with calculated NOx (alternatively NO to 100ppm with better low range accuracy) (Alternatively any toxic sensor can be replaced with a 1000ppm Nitrogen Dioxide (NO2) sensor) High range CO sensor instead of standard CO sensor Low range NO sensor in place of standard NO sensor NO2 sensor in place of any other toxic gas sensor SO2 sensor in place of any other toxic gas sensor Optional Extras Inlet Temperature Differential pressure KMIRP infra-red thermal paper printer KANE ImPrint infra-red plain paper printer

Technical Specications KANE940 Parameter Flue Temperature with Probe Inlet Temperature Carbon Monoxide Nitrogen Dioxide Sulphur Dioxide Temp Measurment Carbon Monoxide (high range) Nitric Oxide (standard) Nitric Oxide (low range) Temp (Nett) Poison Index Pre-programmed Fuels The KANE940 measures O2, flue and nett temperature and calculates CO2, boiler efficiency, excess air and losses. CO is measured with a hydrogen compensated sensor for increased accuracy. It also measures CO and calculates CO/CO2 ratio - ‘The Poison Index’ - to give complete readings for effective boiler analysis and safety....