TemperatureSensor 83
8Pages

Data sheet TemperatureSensor 83 4-wire temperature sensors with connection head for use with heat and cooling meters • Delivered as a set of two paired temperature sensors • Pocket sensor with quick response to temperature changes • Exchangeable Pt500 sensor insert • High water resistance (IP68) • Support of temperature offset adjustment

Contents Application 2 Approvals and verification 3 Construction 4 Dimensional sketch 4 Technical data 5 Application area 5 Optimise the accuracy of inlet and outlet temperatures through offset adjustment 6 Mounting examples 6 Electrical connection 7 Connection cable 7 Sealing example 8 Ordering 8 Application TemperatureSensor 83 consists of two paired temperature sensors and is used together with electronic energy meters for measuring the inlet and outlet temperatures. The temperature sensors have built-in platinum resistors of which the electric resistance changes according to the...

Approvals and verification Heat/Cooling Technical Illustration Description: MULTICAL® 803 - Connection to ULTRAFLOW® and TS 83 Drawing no.: S2130_1 Created date: 11-01-2021 Scale: 1:4,1 MID approval DK-0200-MI004-046 Temperature range Temperature difference Danish cooling approval TS 27.02 017 Temperature range Temperature difference Pairing and verification according to EN1434-5:2015.

Dimensional sketch Heat/Cooling Technical Illustration Description: TemperatureSensor 83 - Exploded View Drawing no.: S2111_1 Created date: 05-01-2021 Sensor insert Sensor pocket with connection head Kamstrup A/S • 58101819_A1_GB_02.2021 Heat/Cooling Technical Illustration Description: TemperatureSensor 83 - Main dimensions Drawing no.: S2142_1 Created date: 12-01-2021 Heat/Cooling Technical Illustration Description: TemperatureSensor 83 - Main dimensions Drawing no.: S2142_1

Technical data Component Time constant τ0.5 when mounted in pocket Diameter of temperature sensor Length of temperature sensor sleeves Material for temperature sensor sleeves Cross section of silicone cable Pocket lengths Material for connection head Application area Ambient temperature Storage and transport temperatures Medium Medium temperature Humidity IP class Approved mechanical classes Approved pressure stages Maximum flow velocity -10 °C…70 °C -25 °C…70 °C District heating water 0…150 °C, for a short period 160 °C < 98 % rF condensing IP 68 M1, M2 PN16

Optimise the accuracy of inlet and outlet temperatures through offset adjustment The heat/cooling meters MULTICAL® 303, MULTICAL® 403, MULTICAL® 603 and MULTICAL® 803 have an offset adjustment function that enables the adjustment of the inlet and outlet temperatures by up to ± 0.99 K. The offset adjustment value is determined in connection with the factory calibration of Kamstrup TemperatureSensor 83, and when this value is embedded in the meter, the deviation of the inlet and outlet temperatures will typically be less than ± 0.1 K. As both the inlet and outlet temperatures are adjusted...

Heat/Cooling Technical Illustration Description: TemperatureSensor 83 connected to MULTICAL® 603 - 2 Wired Heat/Cooling Technical Illustration A4 Created date: 21-12-2020 Scale: 2:1 and 1:2 Format: Description: TemperatureSensor 83 connected to MULTICAL® 603 - 4 Wired Created date: 18-12-2020 Scale: 2:1 and 1:2 Connection cable Note: When using 2-wire connection, the inlet and outlet sensors must be connected with equally long cables. * MULTICAL® 603 and 803 are MID-approved for 100 m 4-wire connection cable. Mantle material PVC PUR SILICONE ooling Technical Illustration Description: Pt 500...

Heat/Cooling Technical Illustration Description: TemperatureSensor 83 - Sealing illustrations Drawing no.: S2110_1 Created date: 04-01-2021 Description TemperatureSensor 83, length 65 mm TemperatureSensor 83, length 90 mm TemperatureSensor 83, length 140 mm TemperatureSensor 83, length 180 mm Paired Pt500 inserts for TemperatureSensor 83 * The order number may vary due to local approvals Sealing example