READy Ethernet inputs (In-A, In-B)
8Pages

Data sheet READy Ethernet inputs (In-A, In-B) MULTICAL® 603 MULTICAL® 803 • Connects and sends data automatically to READy • Ethernet 10/100BASE-T • Plug-and-play solution • Data sent every hour • Up to 14 days of da

READy Ethernet, inputs (In-A, In-B) Contents Introduction 3 Cable connections Communication from module Technical data Ordering 6 Configuration 6 Displayed information

READy Ethernet, inputs (In-A, In-B) Introduction A high performance ethernet module developed for the MULTICAL® energy meter. The module supports direct communication to Kamstrup READy manager. All data needed for billing and heat intelligence are sent at hourly basis. Application The READy Ethernet module is designed with focus on simple installation and plug-andplay commissioning. The module is a wired solution having the same functionality as the HC-003-80 2G/4G network module. Thus this module provides a wired alternative to those people who are uncomfortable with radio-based equipment....

READy Ethernet, inputs (In-A, In-B) Cable connections Terminals Max cable size: 1.5 mm² Pulse inputs Terminal 65: Pulse In-A (+) Terminal 66: Pulse In-A (-) Terminal 67: Pulse In-B (+) Terminal 68: Pulse In-B (-) Ethernet Terminal 117: Green Terminal 116: Green/White Terminal 115: Orange Terminal 114: Orange/White Pulse inputs The module is equipped with two pulse inputs, In-A and In-B, to collect and accumulate pulses, e.g. from water and electricity meters. The pulse inputs are physically placed on the module. However, the accumulation and logging of values are performed by the MULTICAL®...

READy Ethernet, inputs (In-A, In-B) Communication from module Once the module connects to the READy manager, data are sent from the module every hour. If connection is lost, data will be logged for up to 14 days. Once the communication is re-established, the logged data are passed on to the READy Manager. Protocol Data are sent via the UDP protocol and are end to end encrypted for high secured transport. Network options The module requires that the network has a DHCP server and internet access. Datagram The datagram contains the most common registers used for billing and heat intelligence....

READy Ethernet, inputs (In-A, In-B) Technical data Physical For installation in Mechanical data Dimensions (L x W x D) Weight High-Power SMPS Communication Protocol Data rate Bus-specific Type Galvanic isolation Pulse inputs Input type Open voltage Current Max cable length Environment Operational temperature Humidity CE, MID together with the type approval of MULTICAL® 603 and MULTICAL® 803 Ordering Description READy Ethernet, inputs (In-A, In-B) USB configuration cable for H/C-modules Infrared optical readout head w/USB A plug METERTOOL HCW READy Order No. HC-003-83 6699-035 6699-099...

READy Ethernet, inputs (In-A, In-B) Displayed information Module information can be read by selecting TECH loop on the MULTICAL® display. Module in module slot 1: Select menu 2-101 in TECH loop. Module in module slot 2: Select menu 2-201 in TECH loop. Module in module slot 3: Select menu 2-301 in TECH loop. Module in module slot 4: Select menu 2-401 in TECH loop. Menu 2-x01 Information Module type and configuration Module firmware and revision Module serial number Number of bytes sent (kilo bytes) Number of bytes received (kilo bytes) Link information * Module status ** Display example

READy Ethernet, inputs (In-A, In-B) * Link information has 4 bits of information: Bit number Value when bit = 1 Meaning 3 8 100 Mbit 2 4 Full Duplex 1 2 Auto Negotiation complete 0 1 Link Meaning 10 Mbit Half Duplex Auto Negotiation in progress No Link A value of 15 means: 100 Mbit, Full Duplex, Auto Negotiation Completed and Link ** Module status has 3 bits of information: Bit number Value when bit = 1 Meaning 2 4 No Link 1 2 Internal error 0 1 No configuration If module status shows other values than 0 or 4, the module must be sent in for repair.