Catalogs >
Kamstrup Instumenation >
OMNIPOWER® Residential smart meter

OMNIPOWER® Residential smart meter
4Pages

Catalog excerpts

OMNIPOWER® Residential smart meter The intelligent smart grid component • Stable precision and reliability • Cost-effective investment • Open communication and interoperability • Safety and data prot

Open the catalog to page 1

OMNIPOWER® Residential smart meter The intelligent meter with high precision One of the most important components for establishing an intelligent smart grid system is the smart meter. It does much more than measure energy consumption. It is a key element assuring utilities the possibility of exploiting the full potential of the smart grid. Voltage quality registration OMNIPOWER® has implemented voltage quality measurements based on the European standard EN 50160 specifying: ”Voltage characteristics of electricity supplied by public electricity networks” and helps the utilities to fulfill...

Open the catalog to page 2

OMNIPOWER® Residential smart meter OMNIPOWER® meets the requirements Features OMNIPOWER® OMNIPOWER® single-phase three-phase OMNIPOWER® DIN rail meter 4-quadrant metering Active positive and active negative as well as reactive positive and negative energy. Voltage quality Voltage, current and power per phase. Time stamp on power failures on one or more phases. Registration in configurable levels - overvoltage and undervoltages. Detection of sags and swells, THD and supply voltage unbalance. Disconnection Smart disconnect enables on-demand disconnect of consumers as well as handling of load...

Open the catalog to page 3

OMNIPOWER® Residential smart meter OMNIPOWER® at a glance Meter type OMNIPOWER® single-phase OMNIPOWER® three-phase OMNIPOWER® DIN rail meter Direct three-phase, 4-wire three-phase, 3-wire Accuracy class Active energy: EN 50470-1 (MID), EN 50470-3 (MID), IEC 62052-11, IEC 62053-21 Reactive energy: IEC 62053-23 MID: IEC: IEC: Active energy: Reactive energy: Current range Class A, Class B Class 2, Class 1 Class 3, Class 2 Measurement values A+, A-, R+, R-, active, reactive and apparent power – total and per phase. Mean and peak power. RMS voltage and RMS current per phase, frequency, power...

Open the catalog to page 4