OMNIPOWER ELECTRICITY METERS FOR COMMERCIAL AND INDUSTRIAL APPLICATIONS THE INTELLIGENT SMART GRID COMPONENT HIGH PRECISION SMART METER LOAD MANAGEMENT AND POWER QUALITY INTEROPERABILITY AND FIRMWARE UPGRADE One of the most important components Looking to maximize the utilization of OMNIPOWER meters provide the DLMS/ for establishing an intelligent smart grid assets? With a multitude of loggers and COSEM data collection protocol as system system is the smart meter. It does much tariff registers the OMNIPOWER meters integration interface. This assures a more than measure energy consumption. provide information on loads, time-of- standardized interface between the It is a key element assuring utilities the use, and transformer ratio. Load profiles electricity meter and any data collecting possibility of exploiting the full potential can be generated in various easily system supporting this common configurable time intervals. This detailed OMNIPOWER is Kamstrup’s latest high information helps the load planning- and OMNIPOWER meters take you into the precision smart meter offering long-term future with their modular construction stability and reliability for all applications. the existing resources. The OMNIPOWER and potential to upgrade firmware over meters have extensive power quality logging capabilities, enabling the utility to track all relevant grid information.

VOLTAGE QUALITY REGISTRATION OMNIPOWER enables voltage quality measurements based on the European standard EN 50160 specifying: ”Voltage characteristics of electricity supplied by public electricity networks” and helps the utilities to fulfill their obligations concerning energy, power and voltage quality measurements. Energy and power measurements •• Net-power and energy register •• ower and energy per phase P •• pparent power and energy – kVA and kVAh A •• Power factor Power quality measurements •• Frequency accuracy OMNIPOWER Three-phase •• Supply voltage variations •• apid supply voltage...

OMNIPOWER MEETS THE REQUIREMENTS OMNIPOWER Three-phase Voltage quality Voltage, current and power per phase Time stamp on power failures on one or more phases Registration in configurable levels - overvoltage and undervoltages Detection of sags and swells, THD and supply voltage unbalance Disconnection On-demand disconnect of consumers as well as handling of load limitation functionality Real-time clock (RTC) Timestamping of measurements and events provided by a real-time clock Communication technology via modules Radio (optional integrated radio communication), GSM, GPRS, M-Bus and RS-485 Modules...

Type tests OMNIPOWER Three-phase Active energy: EN 50470-1 (MID), EN 50470-3 (MID), IEC 62052-11, IEC 62053-21, IEC 62053-22 Reactive energy: IEC 62053-23 Accuracy class Class 2 (IEC)/Class A (MID) Class 1 (IEC)/Class B (MID) Class 2 (IEC) (reactive energy) Class 1 (IEC)/Class B (MID) Class 0.5 (IEC)/Class C (MID) Class 2 (IEC) (reactive energy) Current range Ref. voltage/frequency Measurement values Temperature range 1, 2, 3 x 230/400 V – 50/60 Hz A+, A-, R+, R-, active, reactive and apparent power – total and per phase, RMS voltage and RMS current per phase, main frequency, power factor and...