*mydirectindustry

HAN module

Product catalog summary

Overview
The HAN module for Kamstrup electricity meters enables consumers to monitor their current electricity consumption and export data, such as from solar cells or wind turbines. This requires a display compliant with EN-13757-2.

Application
When connected to a display, the module provides real-time data on electricity consumption, helping consumers become more aware and potentially reduce usage. It also shows electricity exported to the grid.

Specifications

OBIS List Information: The module uses the OBIS code system to identify and communicate data. The current version is Kamstrup_V0001, dated 03.05.2016.
Meter Compatibility: Compatible with OMNIPOWER meters, supporting both direct and CT-connected meters.
Voltage and Current: Supports 1x230, 3x230, and 3x230/400 V configurations with a maximum current of 100 A.
Data Transmission: Streams data every 10 seconds and hourly, with a baud rate of 2400 for M-BUS (HAN).
Power and Current Limits: Maximum power to HEMS is 144mW, and maximum current is 6mA, adhering to EN 13757-2 standards.

OBIS Codes
The document lists various OBIS codes for tracking different parameters such as active and reactive power, current phases, and cumulative energy data. Each code is associated with specific data types and units.

Technical Data

Standards: Complies with EN 13757-2 and CE requirements.
Materials: Made from glass-reinforced polycarbonate.
Weight: 50 g.
Protection Class: IP20.
Connection: Uses an RJ45 connector with a maximum cable length of 50 m.
Operating Conditions: Temperature range from -40 °C to 70 °C and humidity from 20% RH to 70% RH.

Ordering Information
The HAN module can be ordered using the code 6840004.

Catalog excerpts

Data sheet HAN module For Kamstrup electricity meters Makes it possible for the consumer to see the current consumption or the export of electricity from e.g. solar cells or wind turbines, etc. To read this data, a dis-play complying with EN-13757-2 must be purchased.

Open the catalog to page 1

HAN module for electricity meters Application When connected to a display, the module can show the consumer the current consumption, with actual data. Thus, the consumer becomes more aware of his consumption and can take steps to reduce it. The module sends information about the most important parameters to a display so the consumer can see the current consumption of electricity. The consumer who, for example, has installed solar cells can also see how much electricity is exported to the grid. HAN specification OBIS List Information Item Description A File name C D E F G H I J K L M N O List...

Open the catalog to page 2

HAN module for electricity meters Kamstrup_V0001 Object Name OBIS List version identifier Meter -ID (GIAI GS1 -16 digit ) Meter type Active power+ (Q1+Q4) Active power- (Q2+Q3) Reactive power+ (Q1+Q2) Reactive power- (Q3+Q4) IL1 Current phase L1 IL2 Current phase L2 IL3 Current phase L3 ULN1 Phase voltage 4W meter , Line voltage 3W meter ULN2 Phase voltage 4W meter , Line voltage 3W meter ULN3 Phase voltage 4W meter , Line voltage 3W meter Clock and date in meter Cumulative hourly active import energy (A+) (Q1+Q4) Cumulative hourly active export energy (A-)( Q2+Q3) Cumulative hourly reactive...

Open the catalog to page 3

HAN module for electricity meters Technical data Standards Materials Weight Sealing 13757-2 Complies with the CE requirements when mounted in the meter. Glass-reinforced polycarbonate 50 g After the mounting, the module can be sealed. Mounted without breaking the seal of the utility. Protection class IP20 Connection RJ45 Cable length Max 50 m. Operating temperature -40 °C to 70 °C Humidity-relative 20 % RH to 70 % RH Functionality Communication GND Not used The external display is connected via an RJ45 connec

Open the catalog to page 4

HAN module

HAN module

Catalog excerpts

All Kamstrup Instumenation catalogs and technical brochures

Archived catalogs