Catalogs >
Kamstrup Instumenation >
Data pulse module

Data pulse module
4Pages

Catalog excerpts

Data sheet Data pulse module for electricity meters • • • • • • • Reading without direct access to the meter Galvanically separated serial communication Collection of pulses from other meters Additional configurable pulse outputs Galvanically separated pulse outputs Easily mounted in the electricity meter No rev

Open the catalog to page 1

Data pulse module Application The data pulse module is used as pulse outputs no. 2 and 3, as an input for pulses and for serial RS-232 or USB data communication (using attached cable). The pulse outputs can be configured to retransmit A+, A+/A- or A+/R+ pulses of the electricity meter to data loggers or CTS equipment. Pulse outputs can be configured for 1 – 1000 pulses/ kWh and with a pulse width of 30 or 80 ms. The pulse input offers to collect pulses from other meters, e.g. a water meter with potentialfree output. The input can be scaled using a configurable pulse division factor. The...

Open the catalog to page 2

Data pulse module Technical data Pulse output The pulse outputs 2 and 3 of the electricity meter is configured as follows: 1 pulse/kWh As standard, the pulse outputs send 1000 pulses/kWh, but can be configured for a pulse division factor (1 - 1000). In addition, the pulse width can be configured for 30 or 80 ms. See technical description. Pulse input For potential-free switch, e.g. reed-switch or relay Cable length, max Leak current, switch max It is possible to scale the reading of the pulse input by a ”pulse division factor”. See technical description. Installation The module is mounted...

Open the catalog to page 3

Data pulse module Order specification Type No. 6850-075 6699-098 6699-106 Description Data pulse module, dual pulse, 9600 USB with 3-wire cable RS 232 converter with cable

Open the catalog to page 4