Mini Peristaltic Pump Small size, easy to install Exquisite and high-end appearance, cost-effective Suitable for the transfer of viscous and non-viscous liquids Flow rate up to 50ml/min Product Material · · · · Pump head cover : Polycarbonates (PC) Motor base material: Nylon Rotating parts: Polyoxymethylene (POM) Pump tubing : Perx Code Description Motor Tubing Material 12V DC brushed motor Perx™ tubing 2mm x 4mm Specifications Code Flow Rate (ml/min) Note: · The flow rate was measured at standard atmospheric pressure, room temperature 25 ℃, measured with pure water without pressure, the actual depending on the media, the outlet pressure is different, the flow rate will appear a certain error. · Noise test results at a distance of 500mm from the product, no pressure at the inlet and outlet, and natural water flow conditions, with an ambient noise of 35dB. · The power is at the maximum output that the pump can achieve under load operation. · The life data is the result of testing under general conditions (regular atmospheric pressure with no pressure at the inlet and outlet), harsh working conditions, which will reduce the product life. · The working environment of the product should not exceed 45℃ and the humidity should not exceed 70% (no condensation), poor working environment will lead to premature damage of the product.

Pump Tubing Code Tubing Material Perx™ tubing · Great resistant to general detergent · Resistance to common chemicals and oxidation Note: The above test data is measured when the pump head runs continuously and uninterrupted at a speed of about 280 rpm, and the room temperature is 20 ℃ pure water without pressure until the pump tube cracks. The actual service life is affected by factors such as medium, working conditions, temperature and humidity, voltage, speed, etc. The test data is for reference. Check the chemical compatibility table of the pipe for specific adaptation conditions. Motor Control...