Mini Peristaltic Pump Suitable for the transmission of viscous and non-viscous liquids Compact structure and high maintainability Exquisite and high-end appearance, high cost performance A variety of pump tube materials are available Secretions analysis workstation Electrolyte analyzer Water quality monitoring Nitrate nitrogen water quality monitor Code Description Motor Tubing Material Number of rollers Installation 24V DC stepper motor （current 1.2A） PharMed® BPT tubing 2.4mm x 5.6mm 3.2mm x 6.4mm 3 rollers 6 rollers Fixed through the board (see the dimensions for details) Pump Tubing Code Tubing Material Silicone tubing · Great resistant to general chemicals, acid, alkali and oxidizing agents · Compatible with virtually all commercial cleaners and sanitizers · Low adsorption, good temperature resistance, not easy to aging · Suitable for transporting various low-corrosive liquids Note: The above test data is measured when the pump head runs continuously and uninterrupted at a speed of about 350 rpm, and the room temperature is 20 ℃ pure water without pressure until the pump tube cracks. The actual service life is affected by factors such as medium, working conditions, temperature and humidity, voltage, speed, etc. The test data is for reference.

Flow Rate (unit: ml/min, singel tubing) Code Note: The above flow parameters are measured at a speed of about 350 rpm at 20℃ room temperatura and standard atmospheric pressure. Actually, depending on the medium, the outlet pressure is different, the DC motor speed error etc, the flow well have a certain error, the measured date as a reference. Dimensions (unit: mm) Overall dimensions Mounting plate holes Overall dimensions with L type bracket

Stepper Motor Wiring Diagram Step angle 1.8°, two-phase four-wire, current 1.2A, wire length 400mm Kamoer Fluid Tech (Shanghai) Co., Ltd.