Mini Peristaltic Pump Suitable for the transfer of viscous and non-viscous liquids Compact structure Exquisite and high-end appearance A variety of pump tube sizes available Stepper motor drive, high precision Juice Drink Machine Ammonia nitrogen detector Small online water quality monitor Urine Analyzer Code Description Motor Tubing Material 24V DC stepper motor （current 1.8A） PharMed® BPT tubing Silicone tubing Blank means straight bracket Pump Tubing Code Tubing Material Silicone tubing · Great resistant to general chemicals, acid, alkali and oxidizing agents · Compatible with virtually all commercial cleaners and sanitizers · Low adsorption, good temperature resistance, not easy to aging · Suitable for transporting various low-corrosive liquids Note: The above test data is measured when the pump head runs continuously and uninterrupted at a speed of about 350 rpm, and the room temperature is 20 ℃ pure water without pressure until the pump tube cracks. The actual service life is affected by factors such as medium, working conditions, temperature and humidity, voltage, speed, etc. The test data is for reference.

Flow Rate (unit: ml/min) Code Tubing Material Note 1: Due to the relatively hard 18# BPT pipe, thin wall thickness and motor torque, the pump pipe cannot be over-preloaded. The use of a single pump may have some backflow phenomenon. If the requirement for backflow is high, it needs to be combined with one-way valve use! Note 2: The above flow parameters are measured with pure water without pressure at 20°C room temperature and standard atmospheric pressure. Actually, according to different media, different outlet pressures, DC motor speed errors, etc., the flow will have certain errors. The data is...

Motor Wiring Diagram Step angle 1.8°, two-phase four-wire, current 1.8A, wire length 400mm Kamoer Fluid Tech (Shanghai) Co., Ltd.