KAS-ST series Features · · · · Mini Peristaltic Pump Suitable for the transmission of viscous and non-viscous liquids Wide flow rate range 5—88ml/min A variety of pump tube materials are available High reliability and low noise Fast Solvent Extractor Ammonia nitrogen detector Precipitation sampler Urine Analyzer Code Description Motor Tubing Material Tubing Size (ID x OD) 24V DC stepper motor 12V DC stepper motor Internal screw External screw PharMed® BPT tubing Silicone tubing 2mm x 4mm Pump Tubing Code Tubing Material Silicone tubing · Great resistant to general chemicals, acid, alkali and oxidizing agents · Compatible with virtually all commercial cleaners and sanitizers · Low adsorption, good temperature resistance, not easy to aging · Suitable for transporting various low-corrosive liquids Note: The above test data is measured when the pump head runs continuously and uninterrupted at a speed of about 300 rpm, and the room temperature is 20 ℃ pure water without pressure until the pump tube cracks. The actual service life is affected by factors such as medium, working conditions, temperature and humidity, voltage, speed, etc. The test data is for reference.

Flow Rate (unit: ml/min) Code Note: The above flow parameters are under the condition of 42 stepper motor at 300rpm (if the speed is too high for a long time, the accumulated heat may affect the normal operation of the pump, so please use it below 300rpm for safety), 20℃ room temperature standard atmospheric pressure Measured with pure water without pressure. Actually, depending on the medium and outlet pr essure, there will be a certain error in the flow rate. The data is for reference only. Dimensions (unit: mm) Overall dimensions Mounting plate holes Motor Wiring Diagram Step angle 1.8°, two-phase...