Mini Diaphragm Vacuum Pump Brushless motor, long lifetime, stable performance EPDM diaphragm, special process treatment High flow, low noise Rubber damping pad, effectively damping vibration Professional design, good appearance On-line flue gas detector VOCs online detector Oil mist purification equipment Code Description Type Motor Power Supply Normal type Brushless motor Parameters Code Flow (L/min) Note 1: This diaphragm pump is an adjustable speed diaphragm pump. The above parameters are tested at the maximum speed. Reducing the speed can reduce the output flow and operating noise of the pump, but the pressure parameters of the pump will not change significantly. Note 2: The flow rate is tested under standard atmospheric pressure, room temperature 25℃, and direct discharge without pressure at the inlet and outlet. The noise is tested at a distance of 500mm from the product. Quiet room test. There are currently no burshless models for sale. For other information, please contact customer service. Note 3: The flow curve test environment (under standard atmospheric pressure, room temperature 25℃), due to differences in practicality, is for reference only.

Recommended mounting screw M3/ST2.9 The rubber machine feet can rotate freely, and the installation dimensions are for reference only. Recommended installation tubing: 4*6 PU tubing. Flow Curve Kamoer Fluid Tech (Shanghai) Co., Ltd.

Motor Wiring 1. Black: GND (negative pole) 2. Blue: PWM (speed control) 3. Yellow： (speed feedback) FG 4. Red: Vcc (positive pole) Two-wire connection (full speed operation): the positive pole is connected to the red wire and the blue wire; the negative pole is connected to the black wire. FG feedback: one pulse speed per revolution, motor speed (RPM)=FG signal × 60 PWM speed regulation: 10K-30K, amplitude 5V, full speed: high level 100% General Specifications Fluid medium Working environment Weight Temperature range: 0℃～40℃; relative humidity: <70% (no condensation water) About 230g Kamoer Fluid...