Mini Diaphragm Vacuum Pump Excellent reliability Low sound level Contamination free transfer Maintenance-free Digitally adjustable motor Can run dry Analytical instruments Lab equipment Medical equipment Emission monitoring Code Description Pump Head Type Single head (small volume) Double heads in series (high pressure) Valve Plate Type Power Supply Double heads in parallel (high flow) I type Pump Head Type Single head Double heads in parallel Double heads in series Kamoer Fluid Tech (Shanghai)

Valve Plate Type Parameters Code Flow (L/min) Motor stalling Motor stalling Disclaimer: Plesae read the following parameter descriptions carefully 1. Flow rate: under standard atmospheric pressure, the product is running without load, and the gas flow rate is tested; 2. Noise: the product runs without load; the distance of the decibel meter is 50cm; the silent room (environmental noise 40dB) test; 3. Life: refer to working environment. Harsh working conditions will reduce product life; 4. Pressure: The maximum pressure parameter that the pump can output under standard atmospheric pressure and...

Bottom mounting hole Side mounting hole Bottom mounting hole Side mounting hole Kamoer Fluid Tech (Shanghai) Co., Ltd.

Bottom mounting hole Side mounting hole 2. Recommended connecting tubing: 5mm(ID) x 8mm(OD) PU tubing 3. Recommended mounting screws: ST 2.9 Motor Wiring 1. HLVP15 A type: 1. Black: GND (negative pole) 2. Blue: PWM (speed control) 3. Yellow： (speed feedback) FG 4. Red: Vcc (positive pole) Two-wire connection (full speed operation): the positive pole is connected to the red wire and the blue wire; the negative pole is connected to the black wire. FG feedback: one pulse speed per revolution, motor speed (RPM)=FG signal × 60 PWM speed regulation: 10K-30K, amplitude 5V, full speed: high level 100%...

Flow curve 1. A type: Flow: ml/min Flow: ml/min Kamoer Fluid Tech (Shanghai) Co., Ltd.

Flow: ml/min Damping feet - 4 PCS, mounting screws (ST2.9) - 8 PCS. Feet installation position Damping feet In addition to the above-mentioned conventional models, HLVP15 can also achieve customized services: A. The valve plate can be replaced with a T-shaped valve plate, to achieve a single flow channel, for customers who only need air intake/inhalation, save mounting space. B. The gas outlet direction can be freely customized on the four quadrant axes. C. For other customization, please contact customer service. Kamoer Fluid Tech (Shanghai) Co., Ltd.