HEPA-Filter booklet
4Pages

A wide stock of standard HEPA-Filters — which is supported by our own vehicle fleet — provides for a short notice delivery service for established filter types. SPECIFICATION TEXT High efficiency micro fibre filter media with spacers of thermoplastic adhesive. The self-supporting media pack with its optimised pleating geometry is sealed particle tight into the frame. The filters are optional available with protection grid. Casing material: MDF, galvanised steel, stainless steel, extruded aluminium Sealing: Flat profile gasket, continuous foam seal, fluid seal, high temperature Kalthoff-HEPA-filters are serialised and labelled with the specific technical data. The filters are packed in solid cardboard boxes. Kalthoff Luftfilter und Filtermedien GmbH HEPA-Filter - Essentials

Today's technology separates the cleanroom in different zones depen- ding on the effective local needed cleanroom class. Especially this required cleanroom class is estab- lished on that spot. This can be done by speed control of the single FFU's or by several skirt systems (plastic Isolators are requested when highest protection for ingredients or operators should be achieved. For product protection the isolator works with positive pressure, when operator protection is required, the isolator works with negative pressure. The advantages of both systems, flexibility and safety, are combined...

Kalthoff-HEPA-Filter panels are composed of high quality micro glass fibre paper and spacers of thermo- plastic adhesive. The self-supporting media pack with its optimised pleating geometry is connected particle tight to the frame. This filter type is usually in merchantable standards as well as in customised various dimen- Casing material: MDF, galvanised steel, stainless steel, extruded aluminium flat profile gasket, continuous foam seal, fluid seal, high temperature Optional available with protection grid Kalthoff HEPA-Filter cells are made of high quality glass fibre paper with textile...

KALTHOFF HEPA- and ULPA Filter panels are made of high quality glass fibre paper to ensure highest level of air filtration up to filter class U 17. According to our standard filters, they are constructed in minipleat- technology with thermoplastic adhesive spacers and PU-potting in an extruded aluminium frame. The sealing is typically a continuous foam seal or fluid seal. This filter type is usually installed in cleanroom applica- tions (filter ceilings, filter fan units, i.e.). To meet today's clean room requirements; they are available in various types for several mounting systems....